Architecture Feet to inches

Is there a way to convert existing dims form feet-inches to inches only

The dim was created in arch style. Example 2'-10 3/16" needs to go

to inches only with out feet. Example 24 3/16" without forcing the

dim.

Thank you,

type "dimstyle" at the command line to launch the DIMENSION STYLE MANAGER, select your dim style and then click on MODIFY (on the left). Find and select the PRIMARY UNITS tab at the top. in the second box down there should be a drop down box for PRECISION. Click on that and select 0'-0". That will round off all of your dimensions that use that dim style to the nearest inch. If you do note see the dims change right away, go up the menu and select dimensions, then look at the bottom and click on UPDATE DIMENSION

You can find a .lsp to do it here

type "dimstyle" at the command line to launch the DIMENSION STYLE MANAGER, select your dim style and then click on MODIFY (on the left). Find and select the PRIMARY UNITS tab at the top. in the second box down there should be a drop down box for PRECISION. Click on that and select 0'-0". That will round off all of your dimensions that use that dim style to the nearest inch. If you do note see the dims change right away, go up the menu and select dimensions, then look at the bottom and click on UPDATE DIMENSION

I don't think that is what the OP wants. Instead once you are in the Primary Units tab, pick the Unit Format and select Fractional, go down a few to the suffix and type in inch marks ".

Any fool can make things bigger, more complex.....

After taking a closer read I think your right:oops: . And I could have quoted your message, but I think your signature rings a bit more true here.