Completely Blank Screen on ALL Layouts and Modelspace

[skipsophrenic]

Has anyon ever experienced this problem?

I've been working on a drawing, and now for some obscure reason, nothing is showing in the "Drawing" area.

All toolbars accounted for.
All servicepacks installed.

I havent deleted the lot (Checked Command History)

All I've got is blackness.:?

[ReMark]

Turn on the lights, take off the sunglasses and open your eyes.

You're sitting in front of the wrong monitor. Go back to YOUR desk.

And you tried a 'zoom extents' and nothing appeared?

[skipsophrenic]

Turn on the lights, take off the sunglasses and open your eyes.

You're sitting in front of the wrong monitor. Go back to YOUR desk.

:lol: :lol: :lol:


And you tried a 'zoom extents' and nothing appeared?

Tried and failed

[ReMark]

And you checked Layer Manager and all layers are "on"?

Is someone in your office having a little fun at your expense? Who did you p*** off yesterday?

[NBC]

I've had this a few times. It's usually something to do with graphics card issues; or even drawings received from (insert expletive) Architects

[skipsophrenic]

And you checked Layer Manager and all layers are "on"?


Yep



Is someone in your office having a little fun at your expense? Who did you p*** off yesterday?

No one as far as am aware,

Odd thing when i closed ACAD an reopened it everything was there :?

[skipsophrenic]

I've had this a few times. It's usually something to do with graphics card issues; or even drawings received from (insert expletive) Architects

Know what u mean! LOL, but this is my own dwg.
very odd - never happened b4

[ReMark]

Did you create a wipeout (with frame turned off) and place it over part (or the entire) drawing? Sort of a "play a stupid trick on myself" thing and forget you did it?

[skipsophrenic]

No wipeout and i have NO idea.

here's what the command histor was before i closed ACAD



Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002 (2)>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: *Cancel*
Command: *Cancel*
Command: <Rename layout>
Command: Specify opposite corner:
Command: Specify opposite corner: *Cancel*
Command: _.MSPACE
Command: _.PSPACE
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-001>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Model>
Regenerating model - caching viewports.
Command:
Command: e ERASE 1 found
Command: '_.zoom _e
Command: *Cancel*
Automatic save to C:\DOCUME~1\psmith2\LOCALS~1\Temp\001dwg_1_1_4475. sv$ ...
Command:
Command: *Cancel*
Command: <Switching to: RCDL-DRG-001>
Regenerating layout.
Regenerating model - caching viewports.
Command: Specify opposite corner:
Command:
Command:
Command: _move 2 found
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command:
Command:
Command: _mtedit
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-003>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-003>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-004>
Regenerating layout.
Regenerating model - caching viewports.
Command:
Command: e ERASE 1 found
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-004>
Regenerating layout.
Regenerating model - caching viewports.
Command:
Command:
Command:
Command: _copybase Specify base point: 1 found
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002>
Regenerating layout.
Regenerating model - caching viewports.
Command:
Command:
Command: _pasteclip Duplicate definition of block Schedule-Rev-Txt ignored.
Duplicate definition of block Schedule-Title-Txt ignored.
Duplicate definition of block BAR SCHEDULE ignored.
Specify insertion point:
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-001>
Regenerating layout.
Command:
Command:
Command:
Command: _mtedit Regenerating model.
Command: Specify opposite corner:
Command: re REGEN Regenerating layout.
Command: Regenerating model.
re REGEN Regenerating layout.
Command: _u REGEN
Command: _u INTELLIZOOM INTELLIZOOM
Command: _u
Command: _u REGEN
Command: _u MTEDIT GROUP
Command: _u LAYOUT_CONTROL Regenerating layout.
Regenerating model - caching viewports.
Command: _u PASTECLIP GROUP
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-003>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-001>
Regenerating layout.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002>
Regenerating layout.
Regenerating model - caching viewports.
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: Model>
Regenerating model - caching viewports.
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Automatic save to C:\DOCUME~1\psmith2\LOCALS~1\Temp\001dwg_1_1_4475. sv$ ...
Command:
Command: Specify opposite corner:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:
Command: Specify opposite corner:
Command: *Cancel*
Command: *Cancel*
Command: '_.zoom _e
Command:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: e ERASE 542 found
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Dimension disassociated.
Command: '_.zoom _e
Command: _u ZOOM INTELLIPAN
Command: _u ERASE
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: e ERASE 1 found
Command: Specify opposite corner:
Command: e ERASE 7 found
Command: '_.zoom _e
Command:
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-001>
Regenerating layout.
Command: '_.zoom _e
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-002>
Regenerating layout.
Regenerating model - caching viewports.
Command:
Automatic save to C:\DOCUME~1\psmith2\LOCALS~1\Temp\001dwg_1_1_4475. sv$ ...
Command:
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-003>
Regenerating layout.
Regenerating model - caching viewports.
Command: *Cancel*
Command: *Cancel*
Command: <Switching to: RCDL-DRG-004>
Regenerating layout.
Regenerating model - caching viewports.
Command:
Automatic save to C:\DOCUME~1\psmith2\LOCALS~1\Temp\001dwg_1_1_4475. sv$ ...
Command:
Command: repair
Unknown command "REPAIR". Press F1 for help.
Command: audit
Fix any errors detected? [Yes/No] <N>: y

Auditing Header

Auditing Tables

Auditing Entities Pass 1
Pass 1 500 objects auditedAcDbSortentsTable(26784)
Error for Entry (28C06,28C09) eDuplicateKey fixed
Pass 1 7100 objects audited
Auditing Entities Pass 2
Pass 2 7100 objects audited
Auditing Blocks

153 Blocks audited
Total errors found 1 fixed 1
Erased 0 objects

Command:
Command:
Command: _qsave

[ReMark]

Well? What's the story? Problem resolved or are you still staring into a black hole?

[skipsophrenic]

Resolved on its own - Somehow?? Don't ask me how as I've got NO idea

[ReMark]

Maybe you shouldn't do drugs so early in the morning.

[rkent]

Has anyon ever experienced this problem?

I've been working on a drawing, and now for some obscure reason, nothing is showing in the "Drawing" area.

All toolbars accounted for.
All servicepacks installed.

I havent deleted the lot (Checked Command History)

All I've got is blackness.:?

I have it happen to me, and only on drawings where I have used TTF. If I change the TTF to shx I never see the problem again. Others have said turning hardware acceleration off will fix it.