salman Posted May 18, 2009 Posted May 18, 2009 Some times when I select objects in model space, hit CTRL + C and then in another drawing when I use 'PASTE TO ORIGINAL COORDINATES' the command simply does not work. Both drawings have the same units. What can be the possible reasons for the failure of the command Please Guide. Quote
GE13579 Posted May 18, 2009 Posted May 18, 2009 I would suggest using CTRL+SHIFT+C (COPYBASE) and CTRL+V (PASTECLIP) to paste when copying from one drawing to the next. You can use 0 as your basepoint on each. Quote
chulse Posted May 18, 2009 Posted May 18, 2009 Sounds like the source and target drawings are not in the same coordinate system. Either the UCS is different or the reference coordinate system is not the same (both in World UCS, but based on different grid systems)... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.