Grid Line - Linetype

[keithwhoriskey]

Hi Guys,

I'm trying to draw dashed grid lines on a floor plan. I can't see the dashes! they are just coming up as a solid line. I have changed the linetype scale factor from 1 to about 25 and it makes no difference! Very confused,

Any help would be much appreciated,

Cheers,

Keith.

[CarlB]

Your LTSCALE setting also affects appearance. Generally should be about 1 if plotting from layourt mode with PSLTSCALE set to 1, or if plotting from MS use a LTSCALE equal to about plotting scale.

To see the dashes, try setting LTSCALE to much lower and higher values as well.

[Lister.ca]

Hi Guys,

I'm trying to draw dashed grid lines on a floor plan. I can't see the dashes! they are just coming up as a solid line. I have changed the linetype scale factor from 1 to about 25 and it makes no difference! Very confused,

Any help would be much appreciated,

Cheers,

Keith.

I know this seems obvious, but.....have you checked to make sure the lines have a linetype of bylayer or the specific linetype you want, and not set to continuous?

[fuccaro]

If you are in Model space be sure that SHADEMODE is set to 2D wireframe

[Harval]

Have experienced a similar problem recently.

To rectify, I reloaded the linetype using the Linetype Manager.

For info I use a global linetype scale of 25 with all lines drawn using a scale of 1.