mateen Posted March 28, 2012 Share Posted March 28, 2012 i have one of the drawing which have contain some line type.... in model space line line type clearly but in paper space it shows only continue line. i check psltscale..... what should i do in order to same show like model Line Types.dwg Quote Link to comment Share on other sites More sharing options...
Bogbadbob658 Posted March 28, 2012 Share Posted March 28, 2012 Un-tick the 'use paper space units for scaling' in the linetype manager (type linetype into the command line to call up the linetype manager) Quote Link to comment Share on other sites More sharing options...
nestly Posted March 28, 2012 Share Posted March 28, 2012 I guess it would depend on how you've prepared the rest of your drawing, but I would generally take a totally different approach than the previous suggestion. You have a global LTSCALE factor of 500, then have assigned a Linetype Scale for those objects in your legend of 0.03, effectively cancelling each other out. My recommendations is to set LTSCALE, MSLTSCALE, PSLTSCALE, and CELTSCALE all at 1 and remove all the linetype overrides. When done this way, all linetype scaling is done automatically for both Model and Paperspace.... you never have to think about Linetype scales ever again. (Some prefer an LTSCALE of 0.5, which will actually display more like your current lines in Model) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.