vactsf Posted March 31, 2012 Share Posted March 31, 2012 Hi all, Sometimes, I get drawings in which the Z co-ordinates of some objects are not zero. In such a case, fillets dont appear properly. I dont know why these objects get values for z co ordinate. Is there any method to set the z co ordinate of all objects in a drawing to zero? Quote Link to comment Share on other sites More sharing options...
aspitanis Posted March 31, 2012 Share Posted March 31, 2012 Yes, there is an Express Tools command FLATTEN Quote Link to comment Share on other sites More sharing options...
vactsf Posted March 31, 2012 Author Share Posted March 31, 2012 Thank you for the reply. But I'm using Autocad 2007. I guess this command is not available. Any other alternative? Quote Link to comment Share on other sites More sharing options...
Dadgad Posted March 31, 2012 Share Posted March 31, 2012 Use the CHANGE command. CHANGE > CTRL A (select all) >P (properties) > E(elevation) > 0(zero for new elevation) >> (enter twice). If you have lines which are not parallel to your UCS they will not be fixed. For those I choose lines (from my quick properties palette) after having selected all, and set starting point Z and end point Z values as '0' > then they will all be fixed too. Quote Link to comment Share on other sites More sharing options...
aspitanis Posted March 31, 2012 Share Posted March 31, 2012 Thank you for the reply. But I'm using Autocad 2007. I guess this command is not available. Any other alternative? AutoCAD 2006 has this command. Have you Express Tools installed? Quote Link to comment Share on other sites More sharing options...
vactsf Posted March 31, 2012 Author Share Posted March 31, 2012 Thank you Dadgad. That worked. And thank you aspitanis. I dont have express tools installed. What are the advantages of doing so? Is it available for free? Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 31, 2012 Share Posted March 31, 2012 Express Tools is a free set of lisp routines and can be installed from the original installation disk. Many people fail to check off the box that will ensure installation during the initial loading of AutoCAD so you are not the first. Advantages? Free lisp routines that can accomplish such tasks as flattening geometry, creating arced text, counting blocks, etc. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted March 31, 2012 Share Posted March 31, 2012 Express Tools is a free set of lisp routines and can be installed from the original installation disk. Many people fail to check off the box that will ensure installation during the initial loading of AutoCAD so you are not the first. Advantages? Free lisp routines that can accomplish such tasks as flattening geometry, creating arced text, counting blocks, etc. They are one of the first things I look at in a new release, as they are always pushing the envelope, before the crowd gets there. Once installed you will have an additional set of toolbars available in your toolbar list which is just for the EXPRESS TOOLS. By visiting EXPRESS TOOLS help you can find even more express tools which have not been included in the toolbar sets, including some commandline ones. Well worth the time to investigate. Quote Link to comment Share on other sites More sharing options...
irneb Posted April 2, 2012 Share Posted April 2, 2012 Yes, I think the express tools I use most if LayFrz (Freeze layers by picking), LayWalk (inspect the drawing one or more layers at a time to see if some things are on the wrong layer), NCopy (copy items from inside blocks or xrefs without exploding / binding them); etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.