verjiii Posted April 5, 2012 Posted April 5, 2012 Hi!Sorry,but my english is not very good,I hope that you'll understand me. Could you tell me if there is any solution to the following problem: When I draw a line and poly-line much stutter and becomes almost impossible to do anything.I have this problem with these two commands. Circles, ellipses, 3D objects .... everything go OK, but those lines .... make me crazy.Please, help! Thank you in advance!:oops: Quote
ReMark Posted April 5, 2012 Posted April 5, 2012 Much "stutter"? Do you mean that the lines have the "jaggies"? Are you drawing the lines at an angle? Quote
SLW210 Posted April 5, 2012 Posted April 5, 2012 Sounds like a video display issue. What is your resolution on your monitor? What are your computer and graphics card specs? Do you have the latest AutoCAD or Manufacturers driver? Quote
verjiii Posted April 5, 2012 Author Posted April 5, 2012 Thank's for yours interest.The computer is not with me at the moment.Tomorrow I'll see all parameters and let you know. Quote
JD Mather Posted April 5, 2012 Posted April 5, 2012 Can you attach a screen shot of the problem and/or the actual file? Do you have snap to grid turned on or off? Quote
ReMark Posted April 5, 2012 Posted April 5, 2012 Thank's for yours interest.The computer is not with me at the moment.Tomorrow I'll see all parameters and let you know. That's funny. Quote
Dadgad Posted April 5, 2012 Posted April 5, 2012 Can you attach a screen shot of the problem and/or the actual file?Do you have snap to grid turned on or off? I was thinking along these lines too JD, and just maybe all of the available OSNAP settings on too for good measure? That would certainly put a little shimmy and shiver in your POLY. :wink: Quote
verjiii Posted April 5, 2012 Author Posted April 5, 2012 Can you attach a screen shot of the problem and/or the actual file?Do you have snap to grid turned on or off? It's turned off Quote
bill_borec Posted April 5, 2012 Posted April 5, 2012 Remark, Is "jaggies" a technical term? or just CAD jargon? (This was typed with my sarcastic tone, in case anyone missed that! Wouldn't want to be flagged for being rude!) The OP problem sounds like a display/video issue. Try "regen all" (REA). Verjiii - What is your 'native tongue'? Mluvite Cesky? Hovorite po Polsky? Sprechen sie Deutsch? May we find someone that may help without the language barrier? Quote
verjiii Posted April 5, 2012 Author Posted April 5, 2012 Remark, Is "jaggies" a technical term? or just CAD jargon? (This was typed with my sarcastic tone, in case anyone missed that! Wouldn't want to be flagged for being rude!) The OP problem sounds like a display/video issue. Try "regen all" (REA). Verjiii - What is your 'native tongue'? Mluvite Cesky? Hovorite po Polsky? Sprechen sie Deutsch? May we find someone that may help without the language barrier? I speak bulgarian,I'll try with REA.Thank you. Quote
ReMark Posted April 5, 2012 Posted April 5, 2012 "Jaggies" is a highly technical term. I would use it with all due caution as your coworkers may tag you as a wonk. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.