glubad55 Posted May 7, 2012 Share Posted May 7, 2012 I've been using AutoCAD 2011 for several months, and I'm familiar with most properties such as layers, etc. I have 2 separate issues, which I'll explain separately. Issue 1. I have 6-7 named views (same drawing) that I use consistently. However, only 2 of them will cause them to show up. Example: I click View #3 from Views #4,#5,or #6. Nothing happens or changes. OR I can click View #1 or #2 (which will regen/show View #1 or #2), then quickly click View #3 during #1's regeneration, and View #3 regenerates clearly. What can I do to make the others show up independently (just one click required)? Issue 2. In 2 views in the drawing mentioned above, a couple of blocks don't show up with the rest of the views. If I enter the Regen command, and then they'll show up. If I hadn't tried it the first time, I would have probably missed the blocks entirely and re-created them. What can I do to make them regenerate correctly the first time? Thanks for any ideas you have. Quote Link to comment Share on other sites More sharing options...
Tcntygrl21 Posted May 7, 2012 Share Posted May 7, 2012 Type in REGENAUTO and set to 1 and see if that helps. Automatic regeneration of the drawing. 0 Turns off the REGENAUTO command 1 Turns on the REGENAUTO command Quote Link to comment Share on other sites More sharing options...
glubad55 Posted May 7, 2012 Author Share Posted May 7, 2012 I typed in REGENAUTO and it was set to ON. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.