MSasu Posted May 17, 2012 Share Posted May 17, 2012 Have tried the ARRAYPOLAR command on AutoCAD 2012 and seems that there is a problem with the prompter asking for number of items. It seems to randomly accept or reject the numerical keyboard input: Command: ARRAYPOLARSelect objects: 1 found Select objects: Type = Polar Associative = Yes Specify center point of array or [base point/Axis of rotation]: Enter number of items or [Angle between/Expression] : 10 Specify the angle to fill (+=ccw, -=cw) or [EXpression] : ... Command: ARRAYPOLAR Select objects: 1 found Select objects: Type = Polar Associative = Yes Specify center point of array or [base point/Axis of rotation]: Enter number of items or [Angle between/Expression] : 10 Point or option keyword required. Enter number of items or [Angle between/Expression] : 11 Point or option keyword required. ... I'm doing something wrong or miss something? Also, seems that I'm not the only one affected. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted May 17, 2012 Share Posted May 17, 2012 Mircea, does seem a bit random, try selecting a basepoint and I think you will find it will work better. Quote Link to comment Share on other sites More sharing options...
MSasu Posted May 17, 2012 Author Share Posted May 17, 2012 Thank you for suggested workaround, Dadgad! Indicating the basepoint seems to solve the issue when command is used on prompter, but unfortunately when called through AutoLISP the error is still there at each try. Quote Link to comment Share on other sites More sharing options...
profcad Posted May 19, 2012 Share Posted May 19, 2012 Use the ARRAY command in your LISP program. You can test it on the command line by typing -ARRAY. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.