Tuns Posted November 12, 2013 Share Posted November 12, 2013 Is there a command that I can use to either A. Click the text and have it change to a pre-designated value or B. Search the drawing for text that has the same value that I specify, then change the text to whatever I want it to. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted November 12, 2013 Share Posted November 12, 2013 For B you can use QSELECT or FILTER - I believe those are in LT. Give it a shot. Also, selecting all the text you want and using Properties to change the value to a common value is always an option. Quote Link to comment Share on other sites More sharing options...
Mike_Taylor Posted November 12, 2013 Share Posted November 12, 2013 For B you can use QSELECT or FILTER - I believe those are in LT. Give it a shot. Also, selecting all the text you want and using Properties to change the value to a common value is always an option. The QSELECT and FILTER command are both in LT. For B an easier method would be the FIND command. Ensure the List Results box is checked and you can double click on occurrence and replace the text with what you want. If you want to replace all instances simply hit the Replace All button. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted November 12, 2013 Share Posted November 12, 2013 Ah, FIND... derr. Didn't think of that one - good catch Mike. Also, you can use Wildcard Characters (scroll to bottom): http://exchange.autodesk.com/autocad/enu/online-help/search#WS1a9193826455f5ffa23ce210c4a30acaf-731e.htm And with FILTER, you can save your search criteria. You cannot save QSELECT or FIND, as far as I know. Quote Link to comment Share on other sites More sharing options...
Tuns Posted November 12, 2013 Author Share Posted November 12, 2013 Filter, the Properties menu and FIND do exactly what I need. Next question: is there another way that doesn't have a menu involved? The reason I ask is I'd like to make a macro out of it if I can. If there isn't a way to do that then I don't mind. Quote Link to comment Share on other sites More sharing options...
Mike_Taylor Posted November 12, 2013 Share Posted November 12, 2013 From everything I can tell there is not. Are these pieces of M-Text or Attributes within blocks? Quote Link to comment Share on other sites More sharing options...
Dana W Posted November 12, 2013 Share Posted November 12, 2013 Is there a command that I can use to either A. Click the text and have it change to a pre-designated value or B. Search the drawing for text that has the same value that I specify, then change the text to whatever I want it to. Menu bar >> Edit >> Find >> Replace >> Replace All. Dunno 'bout the rest, but Find is a command. Quote Link to comment Share on other sites More sharing options...
Tuns Posted November 12, 2013 Author Share Posted November 12, 2013 From everything I can tell there is not. Are these pieces of M-Text or Attributes within blocks? It is just regular text, no attributes. Menu bar >> Edit >> Find >> Replace >> Replace All. I figured that part out but thank you for the information Dana. Anyways, thank you all for your responses. They were all very helpful. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted November 12, 2013 Share Posted November 12, 2013 I never found a way either, but this is exactly why FILTER is a good alternative since you can save the selection criteria. It saves as a *.log file which is a *.txt file and it can be migrated to future versions so you'll never lose it. Quote Link to comment Share on other sites More sharing options...
Tuns Posted November 12, 2013 Author Share Posted November 12, 2013 Where can I find this .log file? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.