Search:

Type: Posts; User: Dadgad

Page 1 of 5 1 2 3 4

Search: Search took 0.12 seconds.

  1. A 3,4,5 triangle is most commonly used in the...

    A 3,4,5 triangle is most commonly used in the field to test for square.
    If the sum of the squares of the sides (9 & 16) is equal to the square of the hypotenuse (the crooked one 5x5=25),
    then you...
  2. It is what it is. You could of course design the...

    It is what it is. You could of course design the house with this parameter in mind, but that seems like a bit of a stretch.
    You have measured the Rise from the top of the finished floor to the top...
  3. You might consider using the parametric drawing...

    You might consider using the parametric drawing capability of the software.
    Infered constraints might help you.
    I don't use it, but look at the screenshot, to get you started.
    I find it hard to...
  4. Replies
    1
    Views
    64

    Welcome to CADTutor. :) It sounds like you want...

    Welcome to CADTutor. :)
    It sounds like you want to turn off SELECTION PREVIEW, on the SELECTION tab in your OPTIONS.
    There are a number of display options controlled by the PREVIEW section, which...
  5. Replies
    7
    Views
    151

    It sounds like you should investigate the options...

    It sounds like you should investigate the options available in, and the use of POLAR SNAPS. :)
    You sound like you would like DYNAMIC INPUT(F12) too, which also offers a good selection
    of optional...
  6. Replies
    13
    Views
    275

    VPSYNC? Nice one rkent, I didn't know that one,...

    VPSYNC? Nice one rkent, I didn't know that one, must be another of those secret society ones! :beer:

    ReMark, I understand how odd it sounds to copy and erase the original, but in light
    of the...
  7. Replies
    13
    Views
    275

    Start the COPY command> select a basepoint, one...

    Start the COPY command>
    select a basepoint, one of the corner grips seems like a good choice,
    enter displacement of 0,0,0 hit ENTER.

    At this point you should have two identical...
  8. Replies
    13
    Views
    275

    No time to check right now, but I would think...

    No time to check right now, but I would think that if you were to COPY your existing viewport in place over the old one, with displacement 0,0,0,
    that you would retain the view in your problematic...
  9. Welcome to CADTutor. :) Might you consider...

    Welcome to CADTutor. :)

    Might you consider adding these dimension styles into your .dwt TEMPLATE of choice?
    Any which you need will be there, any you don't will be purged later, if not used?
    ...
  10. Welcome to CADTutor. :) A LEADER is considered...

    Welcome to CADTutor. :)
    A LEADER is considered a sort of sub class of your DIMSTYLE,
    so the default ARROW style in a regular QLEADER is defined by the DIMSTYLE arrow type.
    You can click on a...
  11. Good detective work! How did you figure that one...

    Good detective work!
    How did you figure that one out, as QAFLAGS isn't even listed in the SYSVDLG descriptions?
    Glad you got it sorted out, and thanks for posting and sharing what you learned. ...
  12. From the looks of things, this must be the new...

    From the looks of things, this must be the new Floridian Forum.
    Where's BlackBox? :)
  13. Thread: Scaling 1:200?

    by Dadgad
    Replies
    4
    Views
    228

    You should be using a Paperspace VIEWPORT. Once...

    You should be using a Paperspace VIEWPORT.
    Once created in your layout, you can click inside of it (it is essentially a window through which you view your modelspace,
    wherein everything should be...
  14. Replies
    8
    Views
    249

    Thanks for the heads up BIGAL, the last thing I...

    Thanks for the heads up BIGAL, the last thing I want to do is knock over the apple cart.
    I have never used Civil 3D, was not aware mine was software specific vertically inappropriate advice. :)
  15. Replies
    8
    Views
    249

    Try using " -PURGE ", yes, include the...

    Try using " -PURGE ", yes, include the hyphen, as it is important.
    Then select R for Regapps first, follow the commandline prompts,
    then select A for all, follow the prompts, and when it is...
  16. When all else fails, look for a simple solution. ...

    When all else fails, look for a simple solution. :)
    That certainly would be a highly likely alternate bit of conjecture. :beer:
  17. As I was writing my earlier response, I started...

    As I was writing my earlier response, I started to opine that if checked in Properties, the text was likely rotated by 90 degrees.
    I erased it, in the interests of brevity and clarity.
    All that...
  18. Do they return to vertical when you are through...

    Do they return to vertical when you are through editing them?

    Consider the screenshot from the SYSVDLG, which likely explains what you are seeing.
  19. If you have chosen the LAYER COLOR Black for any...

    If you have chosen the LAYER COLOR Black for any of those layers or items, and have a black background in Modelspace,
    that could explain it.

    As nestly suggests it could be from any number of...
  20. Replies
    16
    Views
    472

    Steven-g you got me thinking there, and I tried...

    Steven-g you got me thinking there, and I tried to do it with data extraction, which I am reasonably adept at,
    but not easily, for sure. :beer:
Results 1 to 20 of 85
Page 1 of 5 1 2 3 4