samifox Posted March 30, 2017 Share Posted March 30, 2017 hi using acad2010 having performence problems, after testing almost every aspect ive come to conclution that the defined line types perhaps are to be interrogated. what and how do i investigate linetypes among my drawings? Quote Link to comment Share on other sites More sharing options...
BIGAL Posted March 30, 2017 Share Posted March 30, 2017 Why did you start another post ? Anyway purge as much as possible make all objects by layer and linetype "continuous" saveas TEST and reload. See if it works. If you have blocks may need to run a lsip to set linetype bylayer. Re finding the linetype its about 1 by 1 till you find it we had that problem and found 2 linetypes that were a problem, these were generated by another software package changed them to match a Autocad linetype problem went away. Quote Link to comment Share on other sites More sharing options...
tombu Posted March 30, 2017 Share Posted March 30, 2017 Not sure what your issue is, but if it's DGN linetypes AutoCAD has a fix for older versions that's built in to versions 2015 and later. https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-clean-DWG-files-from-the-extra-DGN-linetypes-with-AutoCAD-2015.html Quote Link to comment Share on other sites More sharing options...
samifox Posted March 31, 2017 Author Share Posted March 31, 2017 Not sure what your issue is, but if it's DGN linetypes AutoCAD has a fix for older versions that's built in to versions 2015 and later.https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-clean-DWG-files-from-the-extra-DGN-linetypes-with-AutoCAD-2015.html im using acad 2010 Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 31, 2017 Share Posted March 31, 2017 Are DGN linetypes part of the problem? Quote Link to comment Share on other sites More sharing options...
tombu Posted March 31, 2017 Share Posted March 31, 2017 im using acad 2010 Sorry, wrong link. The first fix was for the 2012 version, but should work for 2010: https://knowledge.autodesk.com/support/autocad/downloads/caas/downloads/content/autocad-C2-AE-dgn-hotfix-for-autocad-2012.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.