+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Forum Newbie
    Using
    Architecture 2016
    Join Date
    May 2016
    Posts
    1

    Default Penn Foster Structural Project - need help before give up

    Registered forum members do not see this ad.

    Hi All!

    I am new to all this drafting things. I started the Autocad Diploma program with AutoCad, now I am on the structural project, which, with help of this forum (THANK YOU ALL) I was able to finish Plate 1. However, now I am completely stuck on Plate 2 and I have no idea whatsoever on how to start this at all, never mind Plate 3, 4, 5...anyone here able to help? The terminology and explanation is so confusing..I am completely fine working with the software itself though. I've searched on the forum but so far could not find any questions on how to begin this...any help will be certainly appreciated, as I am close to give up on this...

  2. #2
    Luminous Being
    Using
    Civil 3D 2016
    Join Date
    Dec 2005
    Location
    GEELONG AUSTRALIA
    Posts
    9,727

    Default

    Without any picture we have no idea of what it is your meant to produce.
    A man who never made mistakes never made anything

  3. #3
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,375

    Default

    Registered forum members do not see this ad.

    I don't think you have searched the forum well enough because the Penn-Foster structural project has been discussed in detail in several threads. I know because I've posted many of the replies as well as images of each plate. So, care to try again?

    Re: Plate 2.

    The student is required to draw the south elevation. In the case of this project you will be drawing everything from the bottom of the footings that support the concrete piers to the very top of the structure which will include the slab (floor), columns (vertical steel members) and beams (horizontal steel members) plus the parapet (low wall) that makes up the perimeter of the top of the structure. If you search the Student Projects forum using the word "structural" I'm pretty confident you'll come across several pertinent threads regarding this project. Look for posts by Car5858 and me. Some of these will contain actual screen shots (images) of Plate 2.

    An image of Plate 2, structural project, can be seen in post #6 of this thread. One of the shorter threads regarding the project.

    http://www.cadtutor.net/forum/showth...or-penn-foster

    If you have further questions post them in this thread. Please be specific. Vague requests for help just lead to playing "20 Questions" which I generally like to avoid. Thanks and good luck.
    Last edited by ReMark; 5th May 2017 at 04:03 pm.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

Similar Threads

  1. looking for feedback on my structural project for penn foster
    By justrideemall in forum Student Project Questions
    Replies: 6
    Last Post: 25th Oct 2015, 11:45 pm
  2. Penn Foster Structural Project (Not the Elective)
    By Jefferson1776 in forum Student Project Questions
    Replies: 1
    Last Post: 1st Oct 2014, 10:24 pm
  3. Penn Foster-Structural Project, Plate 2
    By Rocktamusprime in forum Student Project Questions
    Replies: 13
    Last Post: 25th May 2012, 03:32 pm
  4. Penn and Foster Structural Project Help
    By robxfinch in forum Student Project Questions
    Replies: 22
    Last Post: 20th Nov 2011, 03:31 am
  5. Structural drafting project Plate 2 (penn foster)
    By ANC2008 in forum Student Project Questions
    Replies: 18
    Last Post: 13th Jul 2011, 11:47 pm

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts