+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    Forum Newbie
    Discipline
    Civil
    Using
    AutoCAD 2016
    Join Date
    May 2017
    Posts
    9

    Default Help pls with "Automatically Label Attributes"

    Registered forum members do not see this ad.

    I want any explain how to use "Automatically Label Attributes" LiSP, i need steps how to add serial number on pipes
    this LISP from LEE MAC.

  2. #2
    Forum Newbie
    Discipline
    Civil
    Using
    AutoCAD 2016
    Join Date
    May 2017
    Posts
    9

    Default Help pls with "Automatically Label Attributes"

    I want any explain how to use "Automatically Label Attributes" LiSP, i need steps how to add serial number on pipes.
    ie. (SW-1-A1-1),(SW-1-A1-2),(SW-1-A1-3),.........
    I cannot use it
    this LISP from LEE MAC.
    http://www.lee-mac.com/autolabelattributes.html

  3. #3
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,504

    Default

    Didn't you read the Instructions for running immediately below the Program Description at Lee Mac's website? It doesn't get any clearer than that. Question: Are you sure this particular program is what you need to solve your problem? Are the pipes represented by blocks with attributes?
    Last edited by ReMark; 17th May 2017 at 11:21 am.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  4. #4
    Forum Newbie
    Discipline
    Civil
    Using
    AutoCAD 2016
    Join Date
    May 2017
    Posts
    9

    Default

    This program is already what I want and I have read the instructions on the site and have not been clear enough...... http://www.lee-mac.com/autolabelattributes.html

    my pipes represented by blocks with attributes

    I need Clear steps for add serial number in every pipe (SW-1-A1a-01),(SW-1-A1a-02),(SW-1-A1a-03),(SW-1-A1a-04).........etc.

  5. #5
    Forum Newbie
    Discipline
    Civil
    Using
    AutoCAD 2016
    Join Date
    May 2017
    Posts
    9

    Default

    This program is already what I want and I have read the instructions on the site and have not been clear enough.
    the pipes represented by blocks with attributes, i need to add label with serial number one the pipe like (SW-1-A1a-01),(SW-1-A1a-02),(SW-1-A1a-03),.....
    I cannot find clear steps.

  6. #6
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,504

    Default

    Did you open the file in Notepad and modify any/all of the eight settings available such as name of block, attribute tag, prefix, suffix, starting number, etc.?
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  7. #7
    Forum Newbie
    Discipline
    Civil
    Using
    AutoCAD 2016
    Join Date
    May 2017
    Posts
    9

    Default

    yes I open the file in Notepad and modify name of block, attribute tag and try to use the default tag in Lisp,
    but not working.

  8. #8
    Forum Newbie
    Discipline
    Civil
    Using
    AutoCAD 2016
    Join Date
    May 2017
    Posts
    9

    Default

    by the way 3 TECH Engineers try to use this LISP from Morning and they cannot.

  9. #9
    Super Moderator SLW210's Avatar
    Computer Details
    SLW210's Computer Details
    Operating System:
    Windows 7 PRO 64-bit
    Computer:
    IBM Lenovo
    Motherboard:
    ACPI x64
    CPU:
    Pentium(R) i5 4570 @ 3.2GHz
    RAM:
    8 GB RAM
    Graphics:
    Nvidia Quadro 600 1GB
    Primary Storage:
    300 GB
    Secondary Storage:
    650GB
    Monitor:
    2x ThinkVision 24"
    Discipline
    Multi-disciplinary
    SLW210's Discipline Details
    Occupation
    Design Draftsman
    Discipline
    Multi-disciplinary
    Details
    Mostly do drafting related to manufacturing. From doing site layouts with proposed updates, additions and renovations to be budgeted and submitted for bid, to updating and changing existing drawings to reflect maintenance and repair/revision work done on site.
    Using
    AutoCAD 2011
    Join Date
    May 2007
    Location
    South Florida, USA
    Posts
    11,821

    Default

    I merged your threads.
    “A narrow mind and a fat head invariably come on the same person” Zig Zigler



  10. #10
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,504

    Default

    Registered forum members do not see this ad.

    Quote Originally Posted by Ahmed Elsaabbagh View Post
    by the way 3 TECH Engineers try to use this LISP from Morning and they cannot.
    Tech engineers are overrated and overpaid. Me? I'm just a draftsman.

    AutoAttrib_1.JPG

    As you can see, Lee's program works just fine.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

Similar Threads

  1. Help pls with "Automatically Label Attributes"
    By R3nzoku in forum AutoLISP, Visual LISP & DCL
    Replies: 7
    Last Post: 29th Nov 2014, 08:07 am
  2. Profile View "Tick and label END elevation"
    By baker in forum Civil 3D & LDD
    Replies: 6
    Last Post: 5th Feb 2014, 04:01 pm
  3. Automatically updating "defined width" attributes for MTEXT?
    By Comatosis in forum AutoCAD 2D Drafting, Object Properties & Interface
    Replies: 1
    Last Post: 8th Dec 2011, 09:59 pm
  4. "line component" in label disappears in dragged state
    By Rsblades in forum AutoCAD Bugs, Error Messages & Quirks
    Replies: 0
    Last Post: 31st Aug 2011, 04:33 pm
  5. "Cross-reference and Label Block" problems
    By rnj in forum AutoCAD General
    Replies: 0
    Last Post: 12th Mar 2007, 08:01 pm

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts