+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Discipline
    Education
    Using
    AutoCAD 2014
    Join Date
    Mar 2017
    Location
    Indiana
    Posts
    10

    Default Project Grade Reports

    Registered forum members do not see this ad.

    Hey ReMark,

    I was wondering if I might be able to contact you in a way other than this forum. I have successfully completed the Penn Foster AutoCAD course and received a 100% on all of my drawings. I would like to send you my drawings so you can use them to help people in the future. I know I have looked to this forum quite often and really appreciate all you and others have done to help everyone else. I know you don't like giving your personal info on the forum and I can understand that, but I would like to give back if at all possible and I doubt I will follow this forum now that I have completed my course. Please let me know your thoughts.

    Thanks again for all your help!

  2. #2
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,378

    Default

    Hellcat:

    Your offer is very generous. Since you can't PM me the next best thing would be to tell me when you next expect to visit the forum and I will post my contact information in the Messages area of my profile. It will be for a limited time only though at which point the information will be removed.

    BTW...congratulations on receiving a perfect grade on all of your drawings.

    Regards,

    ReMark
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  3. #3
    Super Moderator f700es's Avatar
    Computer Details
    f700es's Computer Details
    Operating System:
    Windows 7 Pro (W)/Windows 7 Home Premium (H)
    Computer:
    Dell Optiplex 9020 (W)/ Dell Inspiron 570 (H)
    Motherboard:
    Intel (W)/AMD (H)
    CPU:
    Intel Core i7-4770 quad (W)/AMD Athlon 2 X4 (H)
    RAM:
    16 GB DDR3 (W)/ 6GB DDR3 (H)
    Graphics:
    nVidia Geforce GTX 645 (W)/nVidia GF GT430 (H)
    Primary Storage:
    256 gb SSD 0/ 1TB 1 (W)/1 TB (H)
    Secondary Storage:
    Seagate FreeAgent Go 320gb
    Monitor:
    Samsung P2770HD 28" LCD and Samsung B2430 (W)/Acer 28" LCD (H)
    Discipline
    Facilities Mgmt
    f700es's Discipline Details
    Occupation
    Space Database Admin
    Discipline
    Facilities Mgmt
    Details
    Archibus Management, Space planning, Design
    Using
    AutoCAD 2017
    Join Date
    Sep 2002
    Location
    Winston-Salem, NC - USA
    Posts
    5,536

    Default

    Good job! Congrats
    Please do not PM me with CAD questions. Post your question on the forum. Our users are the best out there and you'll get the best possible answer to your question.

    - http://f700es.deviantart.com/gallery/ -


  4. #4
    Junior Member
    Discipline
    Education
    Using
    AutoCAD 2014
    Join Date
    Mar 2017
    Location
    Indiana
    Posts
    10

    Default

    ReMark,

    You may or may not be on right now (5:00pm EST) but hopefully you will get this at some point this evening. I will check back around 8-8:30 this evening.
    Thanks!

  5. #5
    Junior Member
    Discipline
    Education
    Using
    AutoCAD 2014
    Join Date
    Mar 2017
    Location
    Indiana
    Posts
    10

    Default

    ReMark,

    I will be back here tomorrow afternoon, June 22, about 5pm EST. If you would please post your contact info, I will get my drawings to you as quickly as possible.

    Thanks again for all of your help!

  6. #6
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,378

    Default

    Hellcat: Seems our schedules are slightly misaligned. I'm usually not on much after 4 p.m. as I have a long commute followed by a quick dinner and then working around the house. Best time to catch me is much earlier in the day. It is 5:41 a.m. EST at the moment.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  7. #7
    Junior Member
    Discipline
    Education
    Using
    AutoCAD 2014
    Join Date
    Mar 2017
    Location
    Indiana
    Posts
    10

    Default

    Ok, lets shoot for tomorrow, June 23, at 6am if that works for you!

  8. #8
    Junior Member
    Discipline
    Education
    Using
    AutoCAD 2014
    Join Date
    Mar 2017
    Location
    Indiana
    Posts
    10

    Default

    *6am EST that is

  9. #9
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,378

    Default

    Quote Originally Posted by Hellcat View Post
    *6am EST that is
    Almost lunch time for me. I'll email myself a reminder.

    Friday, June 23.

    Check my Messages area. Note the information in the first message to appear with my avatar beside it.
    Last edited by ReMark; 23rd Jun 2017 at 11:01 am.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  10. #10
    Junior Member
    Discipline
    Education
    Using
    AutoCAD 2014
    Join Date
    Mar 2017
    Location
    Indiana
    Posts
    10

    Default

    Registered forum members do not see this ad.

    Got it, thank you very much!

Similar Threads

  1. Customizing Toolbox Reports
    By Johnaa52 in forum AutoLISP, Visual LISP & DCL
    Replies: 1
    Last Post: 3rd Jul 2012, 12:53 pm
  2. Working with Schematic Reports...
    By MFish in forum AutoLISP, Visual LISP & DCL
    Replies: 8
    Last Post: 9th Apr 2008, 05:52 pm
  3. Printing CAD DWF into Access reports
    By Vinny1974 in forum AutoCAD Drawing Management & Output
    Replies: 1
    Last Post: 21st May 2004, 11:47 am

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts