+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Forum Newbie
    Discipline
    Education
    Using
    AutoCAD 2015
    Join Date
    Jul 2017
    Posts
    6

    Default PennFoster HVAC elective

    Registered forum members do not see this ad.

    Looked through threads and couldn't find any images of the HVAC elective project. If anyone has the project or can find images of the 4 plates could you please post it? Thanks in advance

  2. #2
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,448

    Default

    This wouldn't be HVAC Project 9 would it?

    If not, can you attach a copy of the PDF that describes the project?
    Last edited by ReMark; 4th Oct 2017 at 07:16 pm.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  3. #3
    Forum Newbie
    Discipline
    Education
    Using
    AutoCAD 2015
    Join Date
    Jul 2017
    Posts
    6

    Default

    Yes ReMark this is the HVAC elective Project 9. I would just like an image of the plates just to make sure I'm on the right track. Its tough figuring out the ductwork without an image of what it should look like. I'm a visual learner

  4. #4
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,448

    Default

    Does the image below match up with the project scope for plate 1?

    Proj 9 HVAC plt 1.jpg
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  5. #5
    Forum Newbie
    Discipline
    Education
    Using
    AutoCAD 2015
    Join Date
    Jul 2017
    Posts
    6

    Default

    That's it! Thanks for finding it for me!!

  6. #6
    Forum Newbie
    Discipline
    Education
    Using
    AutoCAD 2015
    Join Date
    Jul 2017
    Posts
    6

    Default

    Is there anyway you could find the last 3 plates for this project? or direct me to a thread about this elective?

  7. #7
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,448

    Default

    Registered forum members do not see this ad.

    You do realize that part of this learning process is the ability to follow written instructions? You are not always going to get a drawing of the object(s) you are supposed to draw. It some cases you'll be lucky if you get a rough sketch.

    The three remaining plates as per your request.

    Plate 2
    proj 9 HVAC plt 2.jpg

    Plate 3
    proj 9 HVAC plt 3.jpg

    Plate 4
    proj 9 HVAC plt 4.jpg
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

Similar Threads

  1. Pennfoster's Elecrical and electronic schematic drafting project
    By HARPAL in forum Student Project Questions
    Replies: 52
    Last Post: 28th Jan 2015, 08:59 pm
  2. Help Please: Pennfoster/ICS Civil Drafting Plates 3 and 4
    By Lord Wraith in forum Student Project Questions
    Replies: 3
    Last Post: 5th Apr 2013, 09:05 pm
  3. Pennfoster's drafting with Autocad Elective Project (civil Drafting)
    By HARPAL in forum Student Project Questions
    Replies: 23
    Last Post: 8th Jan 2013, 07:21 pm
  4. PennFoster Oleson Village Help
    By abysmalfall in forum Student Project Questions
    Replies: 16
    Last Post: 4th Oct 2012, 11:29 am
  5. PennFoster-Oleson Village-Finalization questions
    By sdick in forum Student Project Questions
    Replies: 16
    Last Post: 8th Mar 2012, 12:07 am

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts