Jozef13 Posted December 3, 2017 Share Posted December 3, 2017 Hello, Could you help me please ? I am frustrated with creation of Dynamic Block with "Plan Readable" Attribute. I've tried to modify existing block that is also working. I am able to create DB with always horizontal attribute but I can not create new one with "Plan Readable" Attribute as you can see in attachment. DB-Plan Readable Att.dwg Quote Link to comment Share on other sites More sharing options...
iconeo Posted December 7, 2017 Share Posted December 7, 2017 You are having trouble trying to replicate the functionality of the other block because you don't have all the pieces. Its not your fault either, I'd call it a bug, but AutoCAD doesn't have bugs right? Go into your source block from Libbya, type in BACTIONBARMODE and toggle it to 0. You will see that there are other parts to this block that must be included. Thanks. Quote Link to comment Share on other sites More sharing options...
Jozef13 Posted December 8, 2017 Author Share Posted December 8, 2017 You are having trouble trying to replicate the functionality of the other block because you don't have all the pieces. Its not your fault either, I'd call it a bug, but AutoCAD doesn't have bugs right? Go into your source block from Libbya, type in BACTIONBARMODE and toggle it to 0. You will see that there are other parts to this block that must be included. Thanks. Thank You very much, It is clear now. But I am not able to set Lookup range parameter to [0,90],(270,0] but only to [0,90],(270,). I am wondering why it is possible in original block but not in my new one. DB-Plan Readable Att-2.dwg Quote Link to comment Share on other sites More sharing options...
iconeo Posted December 8, 2017 Share Posted December 8, 2017 Change your degree units accuracy to 0.0000 Quote Link to comment Share on other sites More sharing options...
Jozef13 Posted December 8, 2017 Author Share Posted December 8, 2017 Change your degree units accuracy to 0.0000 Units accuracy changed but range parameter [0,90],(270,0] still not possible. But if I checked the original block parameter, it has changed to [0,90],(270,359.9999] If I use [0,90],(270,359.9999] in my block, it works fine as well. Is it wrong if I use (270,) for everything greater than 270 ? In fact, greater could be only 360 if I consider degrees. Quote Link to comment Share on other sites More sharing options...
iconeo Posted December 8, 2017 Share Posted December 8, 2017 [0,90],(270,0] - you can't use this as an entry because you are doubling up on 'zero'. That's why Libbya used 359.9999. Quote Link to comment Share on other sites More sharing options...
Jozef13 Posted December 8, 2017 Author Share Posted December 8, 2017 [0,90],(270,0] - you can't use this as an entry because you are doubling up on 'zero'. That's why Libbya used 359.9999. I meant [0,90],(270,) without last zero which mean greather tahn 270 based on AutoDask Help: (For an open-ended range, use one value with a comma, enclosed in brackets or parentheses. For example: [,5] specifies less than or equal to 5; (5,) specifies greater than 5.) Quote Link to comment Share on other sites More sharing options...
iconeo Posted December 8, 2017 Share Posted December 8, 2017 I didn't know that! Putting this here for future reference. https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2017/ENU/AutoCAD-Core/files/GUID-D7EA4891-196B-4912-9EA6-E0033925D72F-htm.html Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.