Chris H. Posted February 7, 2007 Share Posted February 7, 2007 I've got an intermitent problem with copyclip, pasteclip and Wblocks. The functions work in some files but not other it seems to be dependent on the size of the file, i have 7 xref's in the dwg. i can copyclip to the dwg, but not form dwg. is it due to the size of dwg or what? can it be fixed? OR is there a system variable to set? Anyone have a solution for this? Quote Link to comment Share on other sites More sharing options...
abdul quddoos Posted April 18, 2008 Share Posted April 18, 2008 Hi I have problem in the drawing as under 1 first we copy the drawing with Control+C & Paste Control+V in the drwing dont show insertion point & clip paste area 2. also we paste block in teh drawing the same conditon show in the comand promt (pasteclip) butt do not show in the drawing Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 26, 2012 Share Posted January 26, 2012 The post you responded to aquidea is from 2008. It's possible that abdul got a drawing from the outside that was created using AutoCAD 2007 which had a notorious problem with the copy/clip command. Quote Link to comment Share on other sites More sharing options...
chris718 Posted January 26, 2012 Share Posted January 26, 2012 It seem right it has not happened since. ps Thanks for the response, It might be a over 3 years response but At lease someone responded. Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 26, 2012 Share Posted January 26, 2012 chris: Feb. 2007 - Jan. 2012. If the problem happened only once in four years count yourself lucky. Some users had the problem happen once in every 40 minutes. I believe there were two other similar posts that same year. Maybe someone thought you had found the answer on your own and never bothered to report back that you did. Then again, if it really had been that big of a problem you would have returned looking for more input. Don't be such a stranger. Quote Link to comment Share on other sites More sharing options...
SLW210 Posted January 26, 2012 Share Posted January 26, 2012 It still comes up from time to time. Anything created in 2007 without the hotfix applied will still cause problems. DWG TrueView can fix it usually. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.