Mr T Posted March 4, 2007 Share Posted March 4, 2007 (edited) I have cut this out of the FAQ so specifically help/tutorial sites are listed below. Please post any others and I will edit the post and please post any errors or broken links. I have not used all the sites but mainly used the following - Sean Dotson's MCAD Discussion Forums http://www.mcadforums.com Charles Bliss' iParts and iCode Repository http://www.cbliss.com/inventor Kent Keller's iParts and Code Site http://www.kwikmcad.com/ Inventor Topic http://www.inventortopix.com/ Mark Flayler http://blogs.rand.com/manufacturing/ -------------------------------------------------------------------- Inventor Related Websites and Resources -------------------------------------------------------------------- Official Autodesk Inventor Product Information Page (linkes to other pages) http://www.autodesk.com/inventor Autodesk Inventor Updates listing http://knowledge.autodesk.com/support/inventor-products LeaCar LLC (Inventor Tools & Tutorials) http://www.leacar.com/default.shtml Dennis Jeffrey's Tutorials, and Free Courseware http://www.design-excellence.com Peer Hoffman's Worldcup Site http://www.design-excellence.com/worldcup Autodesk Inventor Graphic Card & Driver Info http://www.inventor-certified.com/graphics/ Autodesk's Knowledge Base http://support.autodesk.com/enu/Homepage.asp Autodesk Inventor Developer Web Page http://www.autodesk.com/developinventor AUGI (autodesk Users Group International) Guilds email lists for Inventor (and other product) support http://www.augi.com/ AUGI Inventor Forum http://forums.augi.com/forumdisplay.php?f=79 Autodesk Main Feedback Page www.autodesk.com/feedback Autodesk Product Feedback Page www.autodesk.com/feedback-products Autodesk Vault Page www.autodesk.com/vault Autodesk Product Stream Page www.autodesk.com/productstream Autodesk Design Review page http://usa.autodesk.com/design-review/ Various Yahoo Inventor Groups http://groups.yahoo.com/group/Inventor_Parts http://groups.yahoo.com/group/inventorapi http://groups.yahoo.com/group/InventorJobsCanada http://groups.yahoo.com/group/InventorJobsUSA http://groups.yahoo.com/group/InventorJobsOntarioCanada http://groups.yahoo.com/group/autodeskinventors http://groups.yahoo.com/group/inventorusers http://www.b2-design.biz/tuts.html Edited September 14, 2015 by Lazer Updated and/or deleted dead links Quote Link to comment Share on other sites More sharing options...
Orbit Posted March 4, 2007 Share Posted March 4, 2007 (edited) I doubt you have used them since you give the impression to be stuck on F1. Again I ´v got your point. Stay calm. No one is taking your plate. You have a lot more spare time in your hands to play, copy-paste, etc than I. The below tutorial on sheet metal is not going to be found anywhere and sometime ago…well on one big “hit” of a site 20 people told me that is impossible to flatten it in IV. Only 1 guy said he knows is possible but forgot how to do it. Between you and I: my message to you (the one delete it) still stands. Edited September 14, 2015 by Lazer Dead Links Quote Link to comment Share on other sites More sharing options...
Lazer Posted October 17, 2007 Share Posted October 17, 2007 http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm (you could learn tons of things from him) the difference is he is not training the nursery school. Orbit where have you been? JD Mather is a regular here..:wink: Quote Link to comment Share on other sites More sharing options...
Ritch7 Posted January 24, 2008 Share Posted January 24, 2008 Brilliant, good resources Quote Link to comment Share on other sites More sharing options...
uuvbbz Posted May 18, 2008 Share Posted May 18, 2008 Good.....Good.. Quote Link to comment Share on other sites More sharing options...
Minty Posted July 2, 2008 Share Posted July 2, 2008 (edited) You could add ............... contains some components to aid case modding etc. Dead Link - Lazer (Moderator) Edited September 14, 2015 by Lazer Dead Link Quote Link to comment Share on other sites More sharing options...
Faouweb Posted April 14, 2009 Share Posted April 14, 2009 thank you great resources Quote Link to comment Share on other sites More sharing options...
CharmPeddler Posted April 27, 2009 Share Posted April 27, 2009 wow, this is just perfect, i'm new to inventor and I'm sure i will be using this list ALOT. thanks a TON! Quote Link to comment Share on other sites More sharing options...
MarkFlayler Posted June 7, 2010 Share Posted June 7, 2010 My site has quite a bit of tutorials, videos, and tips & tricks as well... http://blogs.rand.com/manufacturing/ Quote Link to comment Share on other sites More sharing options...
jdits7 Posted September 2, 2010 Share Posted September 2, 2010 I just started my blog a couple of months ago. I am working on alot of different tip & tricks, but for right now I have just been reporting on news for Autodesk Inventor. I have also added links to the What's New docs for the last five years. Check it out. Thanks. http://inventortopix.blogspot.com Quote Link to comment Share on other sites More sharing options...
Morafin Posted January 2, 2011 Share Posted January 2, 2011 Excellent resource for manufactures parts, Available in many formats. Being in the woodworking industry, its the only place I found a decent collection of wood screws, unfortunatly their all metric (European) but its easy to find a converter online. However there are thousands of parts. http://www.tracepartsonline.net/%28S%28viuf5zae5irkmgjudcyf5emt%29%29/global/index.aspx Quote Link to comment Share on other sites More sharing options...
The Santo Posted November 28, 2011 Share Posted November 28, 2011 I quite like using this site for models: http://www.3dcontentcentral.com. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.