Yes. a couple of Icons over from the plot icon there is one that looks like a printer with gold paper in it. That is the Publish icon. Or just type "publish" at the command line. Use the button with a + symbol to add drawings to your list. Make sure that the first drawing has the proper plot settings in the page set up. Once you have all of your drawings listed, select the first one, go to the bottom of the list and while holding the shift key select the last one. Then go back to the top, and in the page set up column click on the drop down menu and select your plot setting. They will all change to match that setting. Look over any check boxes you have. You probably want to make sure that you have selected to plot the layout tabs rather then the model tabs (unless you did your drawings with using paper space). Now you are good to go! Just click publish.