Guest Posted May 22, 2008 Share Posted May 22, 2008 alright, I've been using autocad since 2002, and I've always done this the same way. Go to a standard projection(IE:top, bottom, etc) and then that was your new drawing plane. Now with 2009, it doesn't do that anymore. How do you set the drawing plane in 09? Quote Link to comment Share on other sites More sharing options...
CADguy209 Posted May 22, 2008 Share Posted May 22, 2008 What do you mean by drawing plane? Do you mean the ucs? Quote Link to comment Share on other sites More sharing options...
LCE Posted May 22, 2008 Share Posted May 22, 2008 As CADguy said, can you please explain a little more. If you are talking about changing the view, from a top plan view to a bottom view or and elevational view then you are still able to do this. Look in the VIEW menu, and then 3D views, and select either of the standard views (Top, Bottom, Front, Back, Left or Right) or select 1 of the isometric views (SW isometric, SE isometric, NW isometric or NE isometric) Quote Link to comment Share on other sites More sharing options...
Guest Posted May 22, 2008 Share Posted May 22, 2008 sorry for being so unclear. What I mean is how in 2009, I draw in the top view (the XY plane) and then when I switch to say the left view its still drawing in the top view, instead of the left view(IE YZ or something like that). Quote Link to comment Share on other sites More sharing options...
GE13579 Posted May 22, 2008 Share Posted May 22, 2008 Set UCSFOLLOW to 1? Quote Link to comment Share on other sites More sharing options...
LCE Posted May 22, 2008 Share Posted May 22, 2008 You shouldn't need to do that. If I am understanding correctly (see my previous post), which I am still not sure that I am, then it works fine in 09, the same as it always has... Quote Link to comment Share on other sites More sharing options...
GE13579 Posted May 22, 2008 Share Posted May 22, 2008 Will that work for any viewpoint? I don't use 3D at all, but I know that a change in VPOINT generally needs a PLAN command if UCSFOLLOW is 0, at least that's how I thought it had always been? Quote Link to comment Share on other sites More sharing options...
GE13579 Posted May 22, 2008 Share Posted May 22, 2008 I have just tried in '06 Mechanical to change view as you mentioned LCE with UCSFOLLOW set to 0 and my UCS remained at World. You should check your UCSFOLLOW isn't set to 1 already? Quote Link to comment Share on other sites More sharing options...
JerryG Posted May 22, 2008 Share Posted May 22, 2008 Try; View-3dviews and select desired plane Or type UCS and select from options - such as Ob for Object Or something from 2001? that still works is type UCS and enter just "E" then select object or entity etc. Quote Link to comment Share on other sites More sharing options...
LCE Posted May 22, 2008 Share Posted May 22, 2008 UCSFOLLOW set to 0, using instructions I previously posted, as I have always done it. Works a treat. Quote Link to comment Share on other sites More sharing options...
GE13579 Posted May 22, 2008 Share Posted May 22, 2008 Hmm I can't get the UCS to follow my view with it set at 1 or 0 or even using plan, and I tried with Vanilla as well, maybe I'll step out of this one... Quote Link to comment Share on other sites More sharing options...
CADguy209 Posted May 22, 2008 Share Posted May 22, 2008 Im still not sure what exaclty the TC is trying to accomplish..... Quote Link to comment Share on other sites More sharing options...
Guest Posted May 22, 2008 Share Posted May 22, 2008 well, the thing is, is I'm using the viewcube to navigate. and I can't draw on anything but the XY plane. I'll try that UCSFOLLOW thing. see if it works. I havent tried doing the traditional view>3d views>front left back etc in 2009 yet. I would doubt that it still works. I'm just talking about navigation with the viewcube. Quote Link to comment Share on other sites More sharing options...
CADguy209 Posted May 22, 2008 Share Posted May 22, 2008 If youre working in 3D, and I assume making a model, and you want to draw on the XY plane why dont you try setting up and saving your ucs's in 90 degree intervals relative to your model (front face, right side, top, etc) or using ucs 3 point? If you are creating features on a model your still going to have to draw your base objects on the xy plane anyways, its really not all that different from doing a 2D drawing. This way you can keep your Viewpoint stationary and rotate your ucs around the model as needed in order to draw what ever features you need on their respective faces/planes. You can also save your Viewpoint and then restore it if you need to do a 3DO or some other view viewing oreintation. Hope that helps. Quote Link to comment Share on other sites More sharing options...
Guest Posted May 23, 2008 Share Posted May 23, 2008 okay, I tried both UCSFOLLOW to 0 and 1, and when I set it to one It immediately jumps to XY(top). same with "plan". If the viewcube doesn't set the "drawing plane" to the way I'm looking at then what is its point of it? Quote Link to comment Share on other sites More sharing options...
JMEvans Posted June 10, 2010 Share Posted June 10, 2010 after you have navigated with the view cube you can set the plain by entering the following commands: UCS VIEW that will make your current view the surface on which you are drawing and to set the depth or z, enter this command: UCS MOVE then select the a point. Quote Link to comment Share on other sites More sharing options...
mozatta Posted June 1, 2015 Share Posted June 1, 2015 XY YZ XZ planes by pressing Function Key F5, snap should be ON in details : http://www.mechanicalengineers.co/content/how-do-i-change-xy-yz-xz-planes-autocad-keyboard Quote Link to comment Share on other sites More sharing options...
ReMark Posted June 1, 2015 Share Posted June 1, 2015 The F5 function key is used to toggle between isoplanes (left, top and right) when doing a 2D isometric drawing. It is of no use in a 3D drawing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.