Prorad Posted June 25, 2008 Share Posted June 25, 2008 Hello there, I have Autocad 2007 and get fatal error on opening the layer list (not the drop down menu, the windowed one). I also get the error on using the layer isolate function. Is this a known issue (searching the forum didn't help) ? What should i do? thx Quote Link to comment Share on other sites More sharing options...
LCE Posted June 25, 2008 Share Posted June 25, 2008 What is the fatal error message? Quote Link to comment Share on other sites More sharing options...
Prorad Posted June 25, 2008 Author Share Posted June 25, 2008 for the layer listing it is "Unhandled access violation writing 0x64883cc exception at 64883cch" for the layer isolate it is 0x9e60b6c "Unhandled access violation writing 0x9e60b6c exception at 9e60b6ch" those looks like memory addresses, as they keep changing. Quote Link to comment Share on other sites More sharing options...
Hugh_Compton Posted June 25, 2008 Share Posted June 25, 2008 You might have already tried this but have you done a repair installation? As well as the Layer Isolate command it can also be useful in cluttered drawings to temporarily hide objects. Here's a link to a free routine that will do this for you: AutoHide http://www.3dcadmax.com/FreeAutoHide.htm Quote Link to comment Share on other sites More sharing options...
Prorad Posted June 26, 2008 Author Share Posted June 26, 2008 yepp, i tried several times to uninstall & reinstall the whole thing, didn't help (i also deleted all the remaining stuff in documents&settings\ and program files\common files\, no way). This is also quite strange as it happens on one machine only (btw i have no defective RAM or high temperatures or any other hw issue, already checked). Quote Link to comment Share on other sites More sharing options...
dionnix Posted September 8, 2008 Share Posted September 8, 2008 hi, is there any solution in this problem? thanks Quote Link to comment Share on other sites More sharing options...
Nellie Posted September 8, 2008 Share Posted September 8, 2008 Have you tried downloading the lastest patch from the website? This site won't let me paste a link but if you go on autodesk website and click on support. Cheers Quote Link to comment Share on other sites More sharing options...
runner041 Posted June 28, 2011 Share Posted June 28, 2011 I encountered this problem today. Called our IT guy. He had me go into windows explorer C:/Windows/Temp. He then had me "select all" and delete. Just hit the skip button on the files it tells you it cannot delete. Started AutoCad back up with no restart. Problem solved in less than two minutes! Quote Link to comment Share on other sites More sharing options...
tonebone Posted December 6, 2013 Share Posted December 6, 2013 I fixed this issue by going into options (OP) and then to the profile tab. Change the name of your current configuration, to something like "Tonebone" Profile Click on add to list, name it something like NEW. Then click on NEW, hit Reset button on right. The layer dialog box should open now. Go back into options and profile and set "Tonebone" back to current. That should do the trick. Quote Link to comment Share on other sites More sharing options...
akubeda Posted April 21, 2017 Share Posted April 21, 2017 Thank you, it works for. Great! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.