nukecad Posted September 10, 2014 Share Posted September 10, 2014 There is something weird about this thread with all the necromancing by new members. Some of them never posting again. Often the sign of a spammer, especially if they dont post again. But is also often a newbie thing, they are not sure how forums work and dont know to look at the dates. They just see something they know a possible answer to and try to contribute. They also tend to hijack threads because they haven't worked out to click the new thread button. BTW. Can you honestly say that you have never replied to a thread that has been necromanced, just because it showed up in the 'new threads'? I know that I have, and then kicked myself. Quote Link to comment Share on other sites More sharing options...
RobDraw Posted September 11, 2014 Share Posted September 11, 2014 Often the sign of a spammer, especially if they dont post again. that is not a spammer. Check the definition But is also often a newbie thing, they are not sure how forums work and dont know to look at the dates.They just see something they know a possible answer to and try to contribute. I agree but a lot of the people on this thread are repeating previous solutions and never posting again. Quite unusual. BTW. Can you honestly say that you have never replied to a thread that has been necromanced, just because it showed up in the 'new threads'?I know that I have, and then kicked myself. I have and I've replied to them just because they have been. Your point? My point is that this thread seems to draw a lot of that activity. Maybe it's haunted? Quote Link to comment Share on other sites More sharing options...
nukecad Posted September 11, 2014 Share Posted September 11, 2014 I didn't say it was a spammer, i said once only posting was OFTEN A SIGN of a spammer. (They do other things you don't see unless you are a mod. I wont elaborate and give people ideas). As for the definition of spam, well things change. It started out as- Self Propagating Advertising Message (an email advertising bot). But with the rise of the web and especially forums it has now come to mean anything that is not relevant or is unwanted. Most of it is still advertising. Damn it; now we're keeping this thread going. Must be the ghost infecting us. Quote Link to comment Share on other sites More sharing options...
The Nickster Posted February 18, 2015 Share Posted February 18, 2015 I just had this problem today, for some reason when I toggled the system variable "VPCONTROL" off and then back on it seemed to wake the viewport up so I could select it. Quote Link to comment Share on other sites More sharing options...
npanetta Posted May 20, 2015 Share Posted May 20, 2015 We have a drawing with multiple layouts and active viewports in them. For some reason we are unable to select some of the viewports so that we can resize them. we can see them we just can not select them. I do not see any settings that would affect this. Anyone have any ideas??? I checked to make sure the layers are all on and thawed - i am not able to see if the viewport is locked since I can not select it There is the outside chance the object is on DEFPOINTS layer, which can't be selected when the 0 layer is frozen/off. Use the quickselect feature to grab all viewports within the layout. Go to properties and change to the proper layer. Hope this helps anyone with a similar issue! Quote Link to comment Share on other sites More sharing options...
MillerMG Posted May 22, 2015 Share Posted May 22, 2015 Save close and Re-open should work Quote Link to comment Share on other sites More sharing options...
kjoseph86 Posted October 20, 2015 Share Posted October 20, 2015 I know this has been up for years, but I came here looking for answers. I found something that may answer this. If you unlock your viewport it should become selectable. Then you can lock again and continue on as normal. Odd, but it works. Quote Link to comment Share on other sites More sharing options...
RobDraw Posted October 20, 2015 Share Posted October 20, 2015 I know this has been up for years, but I came here looking for answers. I found something that may answer this. If you unlock your viewport it should become selectable. Then you can lock again and continue on as normal. Odd, but it works. How do you know it is locked? How can you unlock it if it is not selectable? Getting near Halloween and once again this thread gets a hit from a first time poster. Spooky... Quote Link to comment Share on other sites More sharing options...
hamzasirri Posted October 22, 2015 Share Posted October 22, 2015 (edited) Go into the viewport and on the top left...click the [-] and then select Restore layout. Now you should be able to see and select the viewport. http://www.autocadproblems.com/2015/10/unable-to-delete-move-select-viewport.html Edited October 22, 2015 by hamzasirri put url Quote Link to comment Share on other sites More sharing options...
kjoseph86 Posted October 22, 2015 Share Posted October 22, 2015 I could not select it, but I could enter it to do work within. So I just unlocked the viewport (not the layer) and it was then select-able with my mouse. Quote Link to comment Share on other sites More sharing options...
RobDraw Posted October 22, 2015 Share Posted October 22, 2015 So I just unlocked the viewport Well, that cleared it up, but I still had to figure out how to do it. For anyone else that is wondering, this is how to unlock a viewport while it is active: Quote Link to comment Share on other sites More sharing options...
DMur Posted December 15, 2015 Share Posted December 15, 2015 I had the problem of not being able click on the vports. I had to click on the vport to activate the grips, then right click to pull up the menu. Click on Display Viewport Objects. My settings where checked "Yes", but I click on "No" and exited and the re-set to "Yes". Vports are now visible. I hope this helps. Quote Link to comment Share on other sites More sharing options...
DMur Posted December 16, 2015 Share Posted December 16, 2015 In additional to my last post, I just discovered that I had multiple copies of Vports stacked on top each other. Once I deleted the the extra copies the problem went away. Quote Link to comment Share on other sites More sharing options...
MillerMG Posted December 16, 2015 Share Posted December 16, 2015 Good to know! Quote Link to comment Share on other sites More sharing options...
Jeff S Posted February 10, 2016 Share Posted February 10, 2016 Not sure what causes the problem, but a solution that worked for me: Change your current layer to "0". type "audit". select "Y". Quote Link to comment Share on other sites More sharing options...
AUDIE Posted November 3, 2020 Share Posted November 3, 2020 On 7/24/2008 at 3:36 PM, wsucad said: i have no idea how, but this worked i selected all layers and toggled them on/off frozen/thawed locked/unlocked and then i was able to select the viewport - even though all layers were thawed, on and unlocked to begin with YOU ARE MY HERO!!!!!! Quote Link to comment Share on other sites More sharing options...
BillM Posted September 19, 2022 Share Posted September 19, 2022 I tried all these things to no effect. I can see the objects in the viewport but I cannot manipulate the viewport. I wanted to delete it but could not do this. A previous copy of the drwaing had the viewport functional. Therefore I created another layout and copied what I wanted into that layout and deleted the defective one. It's fine now. Quote Link to comment Share on other sites More sharing options...
CyberAngel Posted September 19, 2022 Share Posted September 19, 2022 It's Halloween season again! By the way, welcome to the forum! Quote Link to comment Share on other sites More sharing options...
tombu Posted September 20, 2022 Share Posted September 20, 2022 Google the Express Tool function acet-currentviewport-ename. It returns the entity name of the current viewport. Quote Link to comment Share on other sites More sharing options...
Jolien Posted October 19, 2023 Share Posted October 19, 2023 On 7/24/2008 at 9:36 PM, wsucad said: i have no idea how, but this worked i selected all layers and toggled them on/off frozen/thawed locked/unlocked and then i was able to select the viewport - even though all layers were thawed, on and unlocked to begin with Holy smokes i had the same issue just today and tried everything. Doing this did the trick thanks a million!!! Not sure why this worked but i won't question it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.