rookie37 Posted August 27, 2008 Share Posted August 27, 2008 having trouble with a linetype it is an electrical linetype we use all the time with no problems ---E---E---E---E I import it into my drawing then matchprop the polyline. It changes color and layer and linetype but displays as solid I draw a pline identical to the one that displays as solid. I matchprop no problem I trace over the stubborn lines with new plines ---E---E no problem I erase the stubborn lines thinking the problem solved I zoom out and they appear solid. I zoom back in and they stay that way. I did a regenall with no help The confusing thing is that the original line I imported is not effected. It displays correctly Quote Link to comment Share on other sites More sharing options...
NBC Posted August 28, 2008 Share Posted August 28, 2008 It sounds like the problem linetype has some form of z values (i.e. elevation) attributed to it. Quote Link to comment Share on other sites More sharing options...
MacGyver Posted June 22, 2015 Share Posted June 22, 2015 Attributed Text In Linetypes: Is it still possible to attribute text in a linetype? Early Versions of Cad Version 11/12, I believe had the basic ability to generate an attributed line type. Thoughts MacGyver Attributed Text In Linetypes.docx Quote Link to comment Share on other sites More sharing options...
Dana W Posted June 22, 2015 Share Posted June 22, 2015 Notice this thread is almost 7 years old, and not relevant? You have a modern program, tried it with that? The Giant Spammer Eye is upon you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.