Haz Posted February 17, 2009 Share Posted February 17, 2009 I have 2 objects that were drawn in Cad07 and imported to Viz that I am looking to bend at different points to create a weave looking object. I have tried the twist, wave and bend command but cannot achieve what I want. Please help!!! Below shows what I have and how I am looking to bend them... the Purple and greens layers are to bend and create the weave as below Quote Link to comment Share on other sites More sharing options...
Cad64 Posted February 17, 2009 Share Posted February 17, 2009 I don't know anythiing about Viz, but if I were doing this in Max, I would Detach the purple from the green. The Twist, Wave and Bend modifiers are not going to give you the precise results you need for this operation, so I would manually weave the meshes around the poles. Then, when finished, I would apply a Mesh Smooth modifier to smooth out the results. Quote Link to comment Share on other sites More sharing options...
Haz Posted February 17, 2009 Author Share Posted February 17, 2009 They are on seperate layers, max is very similar to viz, so how would I manually weave them? cheers Quote Link to comment Share on other sites More sharing options...
Cad64 Posted February 17, 2009 Share Posted February 17, 2009 Can you post a wireframe view of the model? I need to see what your mesh looks like. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.