matt4 Posted April 6, 2009 Share Posted April 6, 2009 Hi, I am trying to polar array these circles. I need 6 equally spaced through 360 degrees. For some reason the whole array is staying in the same position as shown by the pic. Any idea what's happening? Sorry for all the questions Thanks Quote Link to comment Share on other sites More sharing options...
Strix Posted April 6, 2009 Share Posted April 6, 2009 I'm guessing you should have selected the CENTRE of the larger circle to be the BASE POINT to ARRAY about? Quote Link to comment Share on other sites More sharing options...
MaxwellEdison Posted April 6, 2009 Share Posted April 6, 2009 Looks like an issue with your center point. Try reselecting it (via the button to the right, cursor pointing at the red X) and make sure you locate it at the center of the larger circle you want the smaller circles arrayed around (i.e. use the center OSNAP). **Edit** Curses! Foiled by Strix! Quote Link to comment Share on other sites More sharing options...
Strix Posted April 6, 2009 Share Posted April 6, 2009 **Edit** Curses! Foiled by Strix! well I don't often get to be first with the right answer on a thread :wink: *waits to find it's not that after all* Quote Link to comment Share on other sites More sharing options...
matt4 Posted April 7, 2009 Author Share Posted April 7, 2009 It worked! Was a issue with the centre point just needed selecting. Thanks guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.