simo2006 Posted June 22, 2009 Share Posted June 22, 2009 Hello, I have drawing I can see it on the layout space but I can’t see it on the model space. Does anyone know why and dose anyone how can I change to model space? Quote Link to comment Share on other sites More sharing options...
stevsmith Posted June 22, 2009 Share Posted June 22, 2009 There should be 3 tabs in the lower left corner of the screen. Model, layout 1 & layout 2. (the layout tabs names may be changed) Click on the model tab and select zoom extents. If you cannon see these tabs then you will have to turn them on. Tools>Options>Display>Layout Elements>Display model and layout tabs. Quote Link to comment Share on other sites More sharing options...
simo2006 Posted June 22, 2009 Author Share Posted June 22, 2009 The problem is when I click on the model space and it’s blank with nothing on it, and when I press (Ctrl + A) to select all objects it seems to be nothing selected but the layout space seems to be fine with full set of drawing. Quote Link to comment Share on other sites More sharing options...
simo2006 Posted June 22, 2009 Author Share Posted June 22, 2009 Can I convert the drawing from layout space to model space? Quote Link to comment Share on other sites More sharing options...
Stela_Tech Posted June 22, 2009 Share Posted June 22, 2009 Your drawing was probably DRAWN in paper space. If you want to bring it to modelspace, you could simply copy it from Pspace, switch to Mspace and past it. You will then have two copies of you drawing. One in Model and one in Paper. If you no longer want the on in paper space you could delete it at that point. (althought I would recomend you to keep a copy of the original file somewhere just in case) Hope this helps! >Stela Quote Link to comment Share on other sites More sharing options...
simo2006 Posted June 22, 2009 Author Share Posted June 22, 2009 I have copied and pasted on the model space but the drawing now seems to be really big, I just can see the first line of it. Quote Link to comment Share on other sites More sharing options...
vinod Posted June 22, 2009 Share Posted June 22, 2009 I have copied and pasted on the model space but the drawing now seems to be really big, I just can see the first line of it. CHSPACE command will do it for you 1. Enter CHSPACE 2. Select Object Ps : Make sure there is active model space viewport in layout. Quote Link to comment Share on other sites More sharing options...
Stela_Tech Posted June 22, 2009 Share Posted June 22, 2009 You also might be too zoomed in on the drawing. You can use the zoom command. Type Z for Zoom and then E for Extents This should zoom out to show you the entire content of you drawing PS:Vinob that CHSPACE is really great! I had never heard of it before. Thanks for the info! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.