Sticks Posted August 13, 2009 Share Posted August 13, 2009 All, I just started to work with the part builder in Civil3d 2008. I was able to create a structure and it seems to look proper with the the dim's and the constraints etc. But when I go to validate the part I get an error. The error reads as follows: Error: part type parameter not validated Validation summery--level 1 errors found. Is there a way to find were the error or what the error is? Thanks Sticks Quote Link to comment Share on other sites More sharing options...
JerryG Posted August 21, 2009 Share Posted August 21, 2009 Pipe parts created with Part Builder must have a width, a height, and a centerline. Therefore, any pipe shapes that do not meet this criteria will not work. Also the section profiles of a pipe must have an enclosed loop. Could it be possible your loop does not close?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.