chelsea1307 Posted August 18, 2009 Share Posted August 18, 2009 I have a dwg with a title block and floor plan xreffed in. All the lines that should be continuos off of the xreffes are not continuous They look like the phantom linetype. all the lines drawn in the dwg using continuous are fine. Thos same xreffs are xreffed into another dwg with no problems. any suggestions? (they both appear on screen and plot) Quote Link to comment Share on other sites More sharing options...
CADMASTER1128 Posted August 19, 2009 Share Posted August 19, 2009 Can you supply a screen print? Quote Link to comment Share on other sites More sharing options...
NBC Posted August 19, 2009 Share Posted August 19, 2009 The layer that you placed the xref onto, is it's linetype set to be phantom ? Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted August 19, 2009 Author Share Posted August 19, 2009 layer not set to phantom the top one has the issues the bottom one shows what it should look like. both off the same .dwg file different layouts same layer Quote Link to comment Share on other sites More sharing options...
CADMASTER1128 Posted August 19, 2009 Share Posted August 19, 2009 Is it possible you may have set the lines to phantom? Check the properties just to be sure. Have you also tired typing "REGEN"? Quote Link to comment Share on other sites More sharing options...
chelsea1307 Posted August 19, 2009 Author Share Posted August 19, 2009 fixed it, NBC you were right the layer was set to phantom, somehow ended up with two layers for my border border2008065 and border200865 didnt notice the difference at first. thanks for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.