Jump to content

How do I find a View port scale?


muck

Recommended Posts

I make a veiw port and go into it and set a scale at 3/4"=1'. I then lock

the view port and go back to may drawing. I check the view port standard

scale field and it says 1:16 I am not good at scales and 1:16 may be the same

as 3/4'=1" but why does that field change? Somes I may want to go to the view port

to look and see what the scale is and I find 1:16 (not 3/4"=1").

How can I find the scale for a view port?

Thank you,

Link to comment
Share on other sites

I do it using any of the following:

 

Quick Properties > Standard Scale.

 

Properties > Misc > Standard Scale.

 

Viewports toolbar in the area set aside for Viewport Scale Control.

Link to comment
Share on other sites

I make a veiw port and go into it and set a scale at 3/4"=1'. I then lock

the view port and go back to may drawing. I check the view port standard

scale field and it says 1:16 I am not good at scales and 1:16 may be the same

as 3/4'=1" but why does that field change? Somes I may want to go to the view port

to look and see what the scale is and I find 1:16 (not 3/4"=1").

How can I find the scale for a view port?

Thank you,

they are the same scales..

Link to comment
Share on other sites

they are the same scales..

 

100% correct... and a good tool for all cad drafters that will help with this is a CadCARD... try: cadcard dot com (sorry for no hyperlink - wouldn't let me)

 

a good tool for quick reference of scale factors, inverse multipliers, their related text heights regarding model space height vs plotted height, dim variables, etc...

 

-e

Link to comment
Share on other sites

Sounds like a sheet stuck on the wall.

 

We plot metric but when setting scales in a view port using keyboard and the vports toolbar I would enter say 4 as a scale hey autocad now says 1:250 so you probably can not without making it a true custom scale have 3/4"=1' displayed

Link to comment
Share on other sites

Maybe you have same problem with me muck.

 

I have to make a shop drawing, so I always draw solid object scale 1:1 in model space and the shop drawing in layout.

 

The shop drawing contains of 3D and 2D drawing. I use viewport for 3D and use solprof command to make 2d then insert it by scale, so the lay out page always plot to scale 1:1 (A4).

 

The problem is the 3D should be in scale 1:1 and it hards to scale in view port. I also try using scale at zoom command but it does't work.:)

cap.pdf

Link to comment
Share on other sites

Funny. My list of scales include all the normal (Imperial) architectural scales like 1/8, 1/4, 1/2, 3/4 and 1"=1'-0".

 

funny - that's exactly what I was thinking before I got in here and saw your post... but I am pretty sure the default scales are set based on your current environment (i.e. imperial vs metric) and they are also customizable as well through your options/ preferences under the user preferences tab - bottom right (for me).... edit scale list button... check it out!

p e a c e ! ! !

-e

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...