Kashmir Posted January 2, 2010 Share Posted January 2, 2010 Hi ppl. I got a problem, it kinda speaks for itself on the screenshot. img64.imageshack.us/img64/4435/screenshot1vk.jpg All the other 3D views are the same, and it's really annoying. All my drivers are updated. Please help! Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 4, 2010 Share Posted January 4, 2010 I tried that link but it comes up blank. What seems to be the problem? Be as specific as possible. Thanks. Quote Link to comment Share on other sites More sharing options...
Kashmir Posted January 5, 2010 Author Share Posted January 5, 2010 Oh, I didnt realize the link didnt work anymore. But my problem is that, when I for example drag a selectionbox in 3D wireframe, and clicks it away again, it just continues to be there. Not actively, but as a kind of layer on top of my other layers. So I can't see the drawing. > Or when I panorate around in 3D wireframe, the drawing just smures out and gets all blurry. It's not a problem I've had in the past, just now that I got back to AutoCad from a time off. At first I thought it could have something to do with my graphic drivers not being updated, but they are... I ideas? Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 5, 2010 Share Posted January 5, 2010 Does this happen in any drawing or just this particular one? When did the problem first occur? Have you made any recent changes to hardware or software? Quote Link to comment Share on other sites More sharing options...
Kashmir Posted January 5, 2010 Author Share Posted January 5, 2010 Ty for replying so fast. It happens in every drawing. It started about a week ago or so. No, I havent made any changes, just updated AutoCad. And yes, it happens in every drawing, but only in the 3D drawing frames, not the 2D wireframe. I can use the 2D wireframe to draw in 3D, but obviously very annoying to do so. Quote Link to comment Share on other sites More sharing options...
ReMark Posted January 5, 2010 Share Posted January 5, 2010 You're saying that AC 2009 is current with the latest update? Quote Link to comment Share on other sites More sharing options...
Car5858 Posted January 5, 2010 Share Posted January 5, 2010 Ty for replying so fast. It happens in every drawing. It started about a week ago or so. No, I havent made any changes, just updated AutoCad. And yes, it happens in every drawing, but only in the 3D drawing frames, not the 2D wireframe. I can use the 2D wireframe to draw in 3D, but obviously very annoying to do so. I have also had this issue on ocassion. When the file size is over 1.5meg it seems to happen alot. I corrected the problem by doing a full reinstallation of acad2009, then reinstalled the up date. The problem has not shown up again for the last few day's. Quote Link to comment Share on other sites More sharing options...
Kashmir Posted January 5, 2010 Author Share Posted January 5, 2010 Ya I ran a repair and it said it was updated after that. Okay, I'll try a re-installation. Hope it works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.