gotchy Posted February 5, 2010 Share Posted February 5, 2010 Can someone tell me what I have set wrong . I am unable to zoom out on a drawing to infinity. My image stops shrinking at about 25% of the screen size and will go no further down. Thanks, gotchy Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 5, 2010 Share Posted February 5, 2010 Unable to zoom out on a draw to infinity? You must have really, really good eyesight. What's the purpose? What zoom option(s) have you tried? Quote Link to comment Share on other sites More sharing options...
RFCAD2319 Posted February 6, 2010 Share Posted February 6, 2010 Try zooming to a value of say .0001 and it should be out far enough for you. If not use a smaller value. Quote Link to comment Share on other sites More sharing options...
CarlB Posted February 6, 2010 Share Posted February 6, 2010 "regen", then you're off to new zoom limits Quote Link to comment Share on other sites More sharing options...
gotchy Posted February 6, 2010 Author Share Posted February 6, 2010 I only use the word infinity to demonstrate that the tool is not working as it should. I need to shrink a drawing to about 3/4" in height on the screen in order to be able to array it about 8 times, and the smallest I can get it down to is 2". In theory, it should have the ability to diminsh down to the size of a dot visually, and yet it locks at 3/4" gotchy Quote Link to comment Share on other sites More sharing options...
Pablo Ferral Posted February 6, 2010 Share Posted February 6, 2010 Regen is your man Quote Link to comment Share on other sites More sharing options...
gotchy Posted February 6, 2010 Author Share Posted February 6, 2010 It is the Man, for sure. The Regen command works just fine. Thank you all so much. gotchy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.