Hogfan Posted June 10, 2010 Share Posted June 10, 2010 I am using AC08 and trying to draw a wall lines behind my products, so it shows that there is a wall back there. Problem is i dont want a dark line, i want it to look like its behind the product. Kinda like a grey dotted line, just so you know there is something back there. Is that the only way is to pick a light color and then change lineweight or am i going in wrong direction here? Quote Link to comment Share on other sites More sharing options...
MikeScott Posted June 10, 2010 Share Posted June 10, 2010 That's partially correct.. personally, I do those setting in my layer settings so that whenever I want a hidden line, I use the hiddenline layer. That means I don't have to remember specific settings and suchlike, it's always going to be consistent across drawings, etc. Changing the color means you probably don't need to change the lineweight (because it'll appear softer with the grey line anyways), but you DO want to change the linetype. In the layers window, click on the linetype and select either a dashed line from the existing list there, or click "load" to load more linetypes to select from... then go back-in and reselect the loaded linetype. The specifics are a matter of preference though.. you might also want to adjust the lineweight and not change the color, or do both, it's all a matter of what you want as your results. I did a lot of test prionts back in the day until I found something I was comfortable with. Quote Link to comment Share on other sites More sharing options...
Nardino Posted June 10, 2010 Share Posted June 10, 2010 choose a color for this line in which the ctb file is set to some screening...say 50% Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.