Jump to content

Invalid URI Error Message


CJJ

Recommended Posts

I have had two of our company's AutoCAD users report a similar message. Both of them seem to have gotten this on Friday, and every time they open AutoCAD this happens. The message pops up showing an error, and when you click Continue, everything seems to be working.

 

I've googled the message, and couldn't find much information that applies to AutoCAD. I think the "URI" message means there is a problem in Mircosoft .NET Framework, but that's about all I can get from it.

 

I was just wondering if anyone had seen a similar message, or has any idea how to fix the problem. I apologize for the long post, but I'm going to paste the full details of the error messages.

 

 

 

Unhandled Exception has occurred in a component in your application. If you click Continue, the application will ignore this error and attempt to continue.

Invalid URI: The format of the URI could not be determined.

 

 

One is using Civil 3D 2009, and gets the following under details:

Application does not support just-in-time (JIT)
debugging. See the end of this message for details.

************** Exception Text **************
System.UriFormatException: Invalid URI: The URI scheme is not valid.
  at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
  at System.Uri..ctor(String uriString)
  at Autodesk.InfoCenter.CommunicationCenter.PopulateContents(ResultItemCollection& contentCollection, ICommCntrChannel channel)
  at Autodesk.InfoCenter.CommunicationCenter.GetContents(ResultItemCollection& channelContents)
  at Autodesk.InfoCenter.CommCntrSource.InitCommunicationCenter()
  at Autodesk.InfoCenter.PaletteMgr.get_CommCntrSrc()
  at Autodesk.InfoCenter.PaletteMgr.LoadCommCenterSources()
  at Autodesk.InfoCenter.PaletteMgr.InitCommCenter()
  at Autodesk.InfoCenter.PaletteMgr.InitSources()
  at Autodesk.InfoCenter.PaletteMgr.FirstInvoke()
  at Autodesk.InfoCenter.PaletteMgr.OnAppIdle(Object sender, EventArgs e)
  at System.Windows.Forms.Application.RaiseIdle(EventArgs e)
  at Autodesk.AutoCAD.ApplicationServices.Application.OnIdleWinForms()
  at Autodesk.AutoCAD.ApplicationServices.Application.OnIdle()


************** Loaded Assemblies **************
mscorlib
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3603 (GDR.050727-3600)
   CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
acdbmgd
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.711.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AcdbMgd.DLL
----------------------------------------
System
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
msvcm80
   Assembly Version: 8.0.50727.3053
   Win32 Version: 8.00.50727.3053
   CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.3053_x-ww_b80fa8ca/msvcm80.dll
----------------------------------------
System.Windows.Forms
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Xml
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
PresentationFramework
   Assembly Version: 3.0.0.0
   Win32 Version: 3.0.6920.1500 built by: QFE
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/PresentationFramework/3.0.0.0__31bf3856ad364e35/PresentationFramework.dll
----------------------------------------
WindowsBase
   Assembly Version: 3.0.0.0
   Win32 Version: 3.0.6920.1427 built by: SP
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/WindowsBase/3.0.0.0__31bf3856ad364e35/WindowsBase.dll
----------------------------------------
PresentationCore
   Assembly Version: 3.0.0.0
   Win32 Version: 3.0.6920.1427 built by: SP
   CodeBase: file:///C:/WINDOWS/assembly/GAC_32/PresentationCore/3.0.0.0__31bf3856ad364e35/PresentationCore.dll
----------------------------------------
acmgd
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.711.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/acmgd.DLL
----------------------------------------
AdWindowsWrapper
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AdWindowsWrapper.DLL
----------------------------------------
AdWindows
   Assembly Version: 1.0.0.0
   Win32 Version: 1.0.711.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AdWindows.DLL
----------------------------------------
ResourceManagement
   Assembly Version: 12.0.76.0
   Win32 Version: 12.0.076.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/ResourceManagement.DLL
----------------------------------------
AdWindows.resources
   Assembly Version: 1.0.0.0
   Win32 Version: 1.0.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/en-US/AdWindows.resources.DLL
----------------------------------------
PresentationFramework.Classic
   Assembly Version: 3.0.0.0
   Win32 Version: 3.0.6920.1427 built by: SP
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/PresentationFramework.Classic/3.0.0.0__31bf3856ad364e35/PresentationFramework.Classic.dll
----------------------------------------
AcMgdReverse
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AcMgdReverse.DLL
----------------------------------------
Redland.NET
   Assembly Version: 1.0.2.1
   Win32 Version: 1.0.2.1
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/Redland.NET.DLL
----------------------------------------
AcInfoCenterConn
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AcInfoCenterConn.DLL
----------------------------------------
AdInfoCenter
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AdInfoCenter.DLL
----------------------------------------
AcWindows
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/AcWindows.DLL
----------------------------------------
AdInfoCenter.resources
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/en-US/AdInfoCenter.resources.DLL
----------------------------------------
Accessibility
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Configuration
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Web.Services
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
----------------------------------------
Autodesk.Interop.WSCommCntr1
   Assembly Version: 17.2.0.0
   Win32 Version: 17.2.56.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%202009/Autodesk.Interop.WSCommCntr1.DLL
----------------------------------------
Microsoft.JScript
   Assembly Version: 8.0.0.0
   Win32 Version: 8.0.50727.3053
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.JScript/8.0.0.0__b03f5f7f11d50a3a/Microsoft.JScript.dll
----------------------------------------

************** JIT Debugging **************
Application does not support Windows Forms just-in-time (JIT)
debugging. Contact the application author for more
information.

Link to comment
Share on other sites

  • Replies 26
  • Created
  • Last Reply

Top Posters In This Topic

  • CJJ

    5

  • mela2010

    3

  • Cadister

    2

  • poidog

    2

Top Posters In This Topic

The second user is using Map 3D 2009, and this is what the details shows

 

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.UriFormatException: Invalid URI: The format of the URI could not be determined.
  at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
  at System.Uri..ctor(String uriString)
  at Autodesk.InfoCenter.CommunicationCenter.PopulateContents(ResultItemCollection& contentCollection, ICommCntrChannel channel)
  at Autodesk.InfoCenter.CommunicationCenter.GetContents(ResultItemCollection& channelContents)
  at Autodesk.InfoCenter.CommCntrSource.InitCommunicationCenter()
  at Autodesk.InfoCenter.PaletteMgr.InitCommCenter()
  at Autodesk.InfoCenter.PaletteMgr.InitPalettes()
  at Autodesk.InfoCenter.PaletteMgr.FirstInvoke()
  at Autodesk.InfoCenter.PaletteMgr.OnAppIdle(Object sender, EventArgs e)
  at System.Windows.Forms.Application.RaiseIdle(EventArgs e)
  at ?A0x2b7cf235.OnIdle()


************** Loaded Assemblies **************
mscorlib
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3603 (GDR.050727-3600)
   CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
acdbmgd
   Assembly Version: 17.1.0.0
   Win32 Version: 17.1.219.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/AcdbMgd.DLL
----------------------------------------
ResourceManagement
   Assembly Version: 11.0.79.0
   Win32 Version: 11.0.079.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/ResourceManagement.DLL
----------------------------------------
msvcm80
   Assembly Version: 8.0.50727.3053
   Win32 Version: 8.00.50727.3053
   CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.3053_x-ww_b80fa8ca/msvcm80.dll
----------------------------------------
acmgd
   Assembly Version: 17.1.0.0
   Win32 Version: 17.1.51.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/acmgd.DLL
----------------------------------------
AecDtlDb
   Assembly Version: 5.5.256.0
   Win32 Version: 5, 5, 256, 0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/AecDtlDb.DLL
----------------------------------------
AecDtlDbUI
   Assembly Version: 5.5.256.0
   Win32 Version: 5.5.256.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/AecDtlDbUI.DLL
----------------------------------------
AecDtlDbLib
   Assembly Version: 5.5.256.0
   Win32 Version: 5.5.256.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/AecDtlDbLib.DLL
----------------------------------------
Redland.NET
   Assembly Version: 1.0.2.1
   Win32 Version: 1.0.2.1
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/Redland.NET.DLL
----------------------------------------
AcInfoCenterConn
   Assembly Version: 17.1.0.0
   Win32 Version: 17.1.51.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/AcInfoCenterConn.DLL
----------------------------------------
AdInfoCenter
   Assembly Version: 17.1.0.0
   Win32 Version: 17.1.219.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/AdInfoCenter.DLL
----------------------------------------
System.Windows.Forms
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Autodesk.Interop.AcInetEngine
   Assembly Version: 17.1.51.0
   Win32 Version: 17.1.51.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/Autodesk.Interop.AcInetEngine.DLL
----------------------------------------
AdInfoCenter.resources
   Assembly Version: 17.1.0.0
   Win32 Version: 17.1.51.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/en-US/AdInfoCenter.resources.DLL
----------------------------------------
Accessibility
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Xml
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
   Assembly Version: 2.0.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
ii5ogyiu
   Assembly Version: 17.1.0.0
   Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
   CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Autodesk.Interop.WSCommCntr1
   Assembly Version: 17.1.51.0
   Win32 Version: 17.1.51.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/Autodesk.Interop.WSCommCntr1.DLL
----------------------------------------
Autodesk.Interop.WebServices1
   Assembly Version: 17.1.51.0
   Win32 Version: 17.1.51.0
   CodeBase: file:///C:/Program%20Files/AutoCAD%20Civil%203D%20Land%20Desktop%20Companion%202008/Autodesk.Interop.WebServices1.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
   <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT de****** registered on the computer
rather than be handled by this dialog box.

Link to comment
Share on other sites

Hi

No solution to this URI problem, but I have 8 users in one of our locations in Finland who just now reported this incident. I am also googling around for help.

These users have AutoCad 2008 LT

Link to comment
Share on other sites

I noticed that on the 28.6 I have received following updates:

Microsoft NET Framework 2 Service Pack 2 - KB976576

Microsoft NET Framework 2 Service Pack 3 - KB977354

 

I asked our designers having the problem to remove updates and see if that helps

Link to comment
Share on other sites

My AutoCAD Lt 2009 was working fine this morning, installed the latest i-tunes 9.2 (64bit) then started getting the URI error. Will try and uninstall that to see if it works, but cant imagine why i-tunes will affect autocad.

 

EDIT - Uninstalled i-tunes and the URI error has gone and my autocad is working normally. Strange.

Link to comment
Share on other sites

  • 4 weeks later...

I have just started encountering this error as well. Although none of my system settings have changed. No programs or updates were installed either. I am using Civil 3D Land Desktop Companion 2008, so I'm guessing by this thread that it's not limited to one certain deployment.

Link to comment
Share on other sites

Hi

No solution to this URI problem, but I have 8 users in one of our locations in Finland who just now reported this incident. I am also googling around for help.

These users have AutoCad 2008 LT

 

I am using AutoCAD 2008 LT & have started receiving the same error. Any resolution yet? Thank you.

Link to comment
Share on other sites

Just had another user get this URI error yesterday, this time with AutoCAD Map 3D 2008.

 

Still no ideas about where it comes from/how to fix it. However, the good news is that the Civil 3D '09 user's message has gone away (on its own). I don't know what changed on his system, but it's possible that a patch from Microsoft may have had something to do with it, but I don't know.

Link to comment
Share on other sites

Myself and one other user received this error today as well. We are both running AutoCAD 2008. I am running 2010 concurrently and it have not had the error. The other guy who had the issue stated that he saw his machine performing a windows update when he booted up this morning.

Link to comment
Share on other sites

I am getting this error each and every time I open AutoCAD. No problems to report once 'Ignore' is clicked, seems more like a hinderance than anything important. Still, would be nice to be rid of it.

Link to comment
Share on other sites

Myself and one other user received this error today as well. We are both running AutoCAD 2008. I am running 2010 concurrently and it have not had the error. The other guy who had the issue stated that he saw his machine performing a windows update when he booted up this morning.

 

Any idea what MS update it was?

Link to comment
Share on other sites

  • 2 weeks later...

Has anyone yet found solution to this problem?

I have LT 2008 and started to think about that I also installed i-Tunes at the time this error started out appearing last spring. Wonder if there is more of us new apple customers?

Link to comment
Share on other sites

I also came across this problem. Except, I am using 2008 and my dialog said "Invalid URI: The URI scheme is not valid."

 

Google didn't return anything useful. :reallymad:

 

The way I fixed it was by looking at the Exception Text. The lines that say 'Autodesk.InfoCenter' were the giveaway. That gave me a hint that it might be something called InfoCenter. :huh: I realize that turning InfoCenter off may not be an option for some -- it was for me.

 

Googling revealed: http://otb.manusoft.com/2007/09/autocad-2008-slow-startup-fix.htm

 

The site showed how to turn off InfoCenter via the registry key HKLM\Software\Autodesk\R17.1\[ACAD-XXXX:XXX]\Applications\InfoCenterAcConn

 

Under that key, I changed LOADCTRLS from 76 to 0.

 

Viola! :D

 

Other links that may help:

http://otb.manusoft.com/2009/03/disable-infocenter-in-autocad-2010.htm

 

http://www.blog.cadnauseam.com/2009/04/03/autocad-2010-turning-off-infocenter/

 

http://www.google.com/search?hl=en&client=firefox-a&hs=DhN&rls=org.mozilla%3Aen-US%3Aofficial&q=%22turn+off%22+Autodesk+%2BInfoCenter&aq=f&aqi=&aql=&oq=&gs_rfai=

 

HTH,

 

Chris

Link to comment
Share on other sites

I too would like to know how to really fix this, surely i can also disable the infocenter but i don't think that is the real solution to this problem. What is causing it in the first place? Seeing that so many people suddenly have this "problem" would suggest a buggy MS update.

Link to comment
Share on other sites

Thanks newvillage for this solution, at least I can get rid of the error message.

 

About being buggy update from M$, maybe so, but it has happened that they corrected something that should have been that way in the first place and someone at autodesk should wake up and make a fix accordingly.

 

As it kind of suggest at the last lines:

"Application does not support Windows Forms just-in-time (JIT)

debugging. Contact the application author for more

information."

 

I wonder why it is not proposing to send error message to autodesk as usual when something odd happens.

Link to comment
Share on other sites

  • 2 weeks later...

i'm running 2008 and have never had a problem until this morning.

 

according to CAD people...

 

 

Update for Case #3542 - "JIT DEBUG Error" Uninstall all versions of Microsoft .NET Framework from your system. Next you will want to uninstall AutoCAD 2008 from your system following these directions

1. Download and install the free version of Revo Uninstaller from the link below.

http://www.revouninstaller.com/revo_uninstaller_free_download.html

2. When you have finished installing the Revo Uninstaller run the Uninstaller on your AutoCAD 2008 install and make sure to use the advanced setting when uninstalling.

3. Now install Microsoft .NET Framework 3.5 from this link

http://www.microsoft.com/downloads/details.aspx?FamilyID=ab99342f-5d1a-413d-8319-81da479ab0d7&displaylang=en

4. After uninstalling reinstall your AutoCAD 2008 software but when you do make sure you are logged in as the Administrator, no other programs are running and disable your antivirus during the install.

5. After uninstalling make sure you download latest update (Update 1) from the link below

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=10035892&linkID=9240618

Edited by Cad64
Edited content
Link to comment
Share on other sites

i'm having the same problem. our CAD tech support sent me info to correct and i'm trying to post the solution...

come on moderator, get it together.

Link to comment
Share on other sites

come on moderator, get it together.

 

Um, ok, please read the restrictions regarding your membership: http://www.cadtutor.net/forum/showthread.php?9177-Why-should-I-register. And pay special attention to item number 4, under the "Forum Newbies" section at the bottom of the page, as it pertains to the exact thing you are currently complaining about.

 

And also, please understand that we do not work for you. We do not get paid to be here and we do not have to put up with attitude. So if you decide to go ahead and break the rules of the forum by putting links into your reply, then you will just have to wait until one of us notices that your post has been caught by the forum software and needs to be approved. Yelling at us and demanding that we approve your post is not the right way to get things done.

 

What you should have done was post a follow up reply, politely asking us to check your previous post for approval. Have you ever heard the saying "You can attract more bees with honey than vinegar"?

 

I have approved your first post, but I have left your second post in permanent moderation. You know, the one with all the capital letters and exclamation points.

 

Hopefully that is "together" enough for you?

 

Have a great day. :wink:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...