AJSmith Posted August 1, 2011 Share Posted August 1, 2011 ok im lost i have a DWF xrefed into my model and a drawing frame view a viewport in a layout tab the print preview looks find shows the DWf and the frame as wanted but the PDf and Plotts just have the frame so were is the DWF going? Quote Link to comment Share on other sites More sharing options...
Dipali Posted August 1, 2011 Share Posted August 1, 2011 i had never done it befor, so i just tried it first & it came out in print. check the layer on which the dwf is inserted, see if it is not on "no plot" layer Quote Link to comment Share on other sites More sharing options...
AJSmith Posted August 1, 2011 Author Share Posted August 1, 2011 a none printing layer was the first thing that came to mind so make sure is was on its own layer to try make it print but still nothing Quote Link to comment Share on other sites More sharing options...
Mr.Alex Posted January 31, 2014 Share Posted January 31, 2014 I'm sure this problem was sorted ages ago, but thought I'd reply in case it helps anyone else - this thread came up in my search when I was having this problem. I had this problem yesterday. A DWF xref wasn't printing. The solution I found was to replace the polygonal viewport I was using with a 'single viewport' (rectangular). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.