CADLee Posted March 9, 2012 Share Posted March 9, 2012 Can anyone help me attach a roof to a one story house. The ceiling height is 9ft. I am still learning and only have done a 2 story house. Can anyone please help me with this. Many THANKS Quote Link to comment Share on other sites More sharing options...
dak4482 Posted March 25, 2012 Share Posted March 25, 2012 Shouldnt be much different than when you did the two story. Just set your plan view to the first floor level, select roof by footprint if applicable, select your overhang distance and check or uncheck defines slope, select all four walls and then click on the green check mark. Then say yes to attach the walls to the roof. There is a book out called Residential Design using Revit 2012 by SDC publications that is VERY good. Their site is http://www.SDCpublications.com. It taught me quite a few things. Quote Link to comment Share on other sites More sharing options...
profcad Posted March 26, 2012 Share Posted March 26, 2012 Place the roof on the 9' level. (Level 2 or Roof) and follow dak instructions above. I agree, the Residential Design book is a good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.