WERDNA Posted April 2, 2012 Share Posted April 2, 2012 Can anyone tell me why a circle is not showing the particular linetype (no matter what scale I adjust it to) until I break the circle line? Quote Link to comment Share on other sites More sharing options...
eldon Posted April 2, 2012 Share Posted April 2, 2012 Can you post a drawing so we don't have to keep on guessing? Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 2, 2012 Author Share Posted April 2, 2012 Will do as soon as I get back to the office. Thanks the reply. Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 3, 2012 Author Share Posted April 3, 2012 Hope this makes it a bit clearer? For some reason the dashed line will not show-up without breaking the line, second image showing the pick boxes. Quote Link to comment Share on other sites More sharing options...
SLW210 Posted April 3, 2012 Share Posted April 3, 2012 You need to post the actual drawing file. Quote Link to comment Share on other sites More sharing options...
rkent Posted April 3, 2012 Share Posted April 3, 2012 Your circles are a long ways from 0,0; you have ltscale set to 0.01, and celtscale set to 0.5. Maybe all of that contributes to your problem. What scale is your viewport set to? Much easier to trouble shoot when you post the actual drawing. Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 5, 2012 Author Share Posted April 5, 2012 How do I post a drg file? Quote Link to comment Share on other sites More sharing options...
MSasu Posted April 5, 2012 Share Posted April 5, 2012 You will find instructions here. Regards, Mircea Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 5, 2012 Author Share Posted April 5, 2012 Dwg file attached. There may be an opportunity to answer another query here, my drgs have been hanging at the slightest thing, even switching from model to paper space, any possible causes? mc00005 HANGERS SECTIONS AND ELV.dwg Quote Link to comment Share on other sites More sharing options...
eldon Posted April 5, 2012 Share Posted April 5, 2012 Thank you for posting the drawing. However, the drawing that I had in mind would have consisted of one circle, whose linetype would not show, and one broken circle whose linetype did show. Now we have hunt the thimble. Could we have a little clue as to where your problem actually exists. Have you tried to set the linetype scale to something like 10 Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 5, 2012 Author Share Posted April 5, 2012 Apologies, must of deleted the circles after the post. That was the file I used to show the problem, I think rkent cracked it with the distance from origin suggestion. I positioned one of the blocks at 0,0 and when viewed within a viewport the hidden circular lines are coming through dashed. Thanks to everyone for their assistance. Quote Link to comment Share on other sites More sharing options...
rkent Posted April 5, 2012 Share Posted April 5, 2012 Andrew, that drawing has some really obvious problems. It has >1000 annotation scales, time to get rid of those. The objects are way, way out from 0,0. There are hatches floating out in the middle of no where. Those are the obvious things, probably others. Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 7, 2012 Author Share Posted April 7, 2012 Ok will look into those issues, thanks for the comments. Quote Link to comment Share on other sites More sharing options...
WERDNA Posted April 10, 2012 Author Share Posted April 10, 2012 I am unable to edit my scale list, no box is opening when I pick it. Is there another way to get rid of the annotation scales? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.