arunz Posted April 29, 2012 Share Posted April 29, 2012 I am using 2d model space i want go to 3d what i will do ? Quote Link to comment Share on other sites More sharing options...
MSasu Posted April 29, 2012 Share Posted April 29, 2012 If you are asking how to switch to a 3D view, then call the VIEW command, select Preset Views and chose one of the Isometric views. If the question is how to model items in 3D, then I suggest to find some tutorials on this mater and follow them. Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 29, 2012 Share Posted April 29, 2012 First switch to the 3D Modeling workspace. Do you know how to manipulate the orientation of your UCS? Quote Link to comment Share on other sites More sharing options...
Dadgad Posted April 30, 2012 Share Posted April 30, 2012 So many different ways to get there. Yet another would be to use the VIEWPORT CONTROLS in the upper left hand corner of your viewport, these controls provide a wealth of different options, without using the ribbon, any toolbars or the commandline. Go to one of the Isometric views as Mircea suggested, and watch your horizons and potential grow before your virtual eyes. Open up your MODELING toolbar or PANEL (on the ribbon) and have a bit of a play with the commands there. No doubt you will want to access some of the wealth of available free tutorials on this site and elsewhere. Your Autocad help will also provide a great deal of useful information. Once it all starts to make a bit of sense then open your SOLID EDITING toolbar and consider those operations. Spend a couple hours learning how the different tools work. If your tooltips are not turned on , they probably should be, as shown in the image. Good luck, the sky is the limit, and in modelspace there is none, so relax and have a little fun. Quote Link to comment Share on other sites More sharing options...
samchums26 Posted April 30, 2012 Share Posted April 30, 2012 Right-click below the menu bar and select the view. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted April 30, 2012 Share Posted April 30, 2012 FYI: O.P. has AutoCAD MEP on their profile. Might be an MEP related question. Quote Link to comment Share on other sites More sharing options...
Dadgad Posted April 30, 2012 Share Posted April 30, 2012 Certainly sounds like it, go get him Tannar. Is it appreciably different? Quote Link to comment Share on other sites More sharing options...
tzframpton Posted May 1, 2012 Share Posted May 1, 2012 Is it appreciably different?Yes it's very different only if the O.P. is asking about 3D with the AEC Objects and additional 3D tools that come with AutoCAD MEP. A vertical product of AutoCAD has far more functionality and tools available than OOTB 3D tools and modeling procedures. That's why I was asking for more clarity. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.