+ Reply to Thread
Results 1 to 6 of 6
  1. #1
    Senior Member
    Using
    AutoCAD 2008
    Join Date
    Feb 2010
    Posts
    106

    Default Generic Tanking/ Waterproofing wetroom detals

    Registered forum members do not see this ad.

    Does anyone know of where I could get typical wetroom/ wet area details in section?

    Thank you to anyone with advice

  2. #2
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro 4000, 2GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2013
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    33,477

    Default

    For those of us who are not familiar with the term "wetroom" could you provide a brief explanation. I hope it has nothing to do with the CIA and waterboarding. Yikes!

    I hope this is what you are referring to.....http://www.diywetroom.com/index.htm

    Check this site out too....http://www.wetroom-solutions.co.uk/
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

  3. #3
    Senior Member
    Using
    AutoCAD 2008
    Join Date
    Feb 2010
    Posts
    106

    Default

    Yeah, that is the wetroom remark, nothing more sinister than that, i am looking for commercial cad details

  4. #4
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro 4000, 2GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2013
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    33,477

    Default

    I could not find any commercial cad details although I found a site with links to installation guides which contained many useful details.

    http://www.advancedwetrooms.com/installation-guides/

    I'll keep looking and should I find anything I'll post a link.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

  5. #5
    Senior Member
    Using
    AutoCAD 2008
    Join Date
    Feb 2010
    Posts
    106

    Default

    Quote Originally Posted by ReMark View Post
    I could not find any commercial cad details although I found a site with links to installation guides which contained many useful details.

    http://www.advancedwetrooms.com/installation-guides/

    I'll keep looking and should I find anything I'll post a link.

    thanks very much for looking remark, I have tried with no success, need it for work for something that is coming up soon but got frustrated looking for general details on it, thanks again

  6. #6
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro 4000, 2GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2013
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    33,477

    Default

    Registered forum members do not see this ad.

    Oh, you'll find general details but they won't be in any CAD format.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

Similar Threads

  1. Are you still using generic AutoCAD for your house plans?
    By Currahee in forum AutoCAD General
    Replies: 3
    Last Post: 26th Oct 2009, 02:40 am
  2. HPGL generic driver to Canon plotter
    By Chudder in forum AutoCAD Drawing Management & Output
    Replies: 2
    Last Post: 3rd Jun 2008, 12:13 pm
  3. Generic CADD is Back and now in Windows!!
    By jfaliveno in forum Catch All
    Replies: 0
    Last Post: 28th Sep 2003, 04:00 pm

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts