Jump to content

Things you should know about Viewports.


ReMark

Recommended Posts

The following information is about Layout Viewports also known as "floating" viewports which are different than Model Viewports also known as "tiled" viewports.

 

Viewports are windows created in a paper space layout that allow the user to see the objects that were created back in model space.

 

Viewports can be created using the MVIEW command.

 

Viewports can be resized with their grips.

 

Viewports can be moved, copied, rotated (see VPROTATEASSOC below), aligned and even deleted.

 

Viewports are assigned a scale not the objects back in model space. Objects in model space should be drawn at FULL size.

 

Each viewport can be assigned its own scale. Therefore it is possible to have six viewports and each can have a different scale.

 

Double click inside a viewport to access model space. Double click outside a viewport to return to paper space. (Thanks Dadgad)

 

It's a good idea to put viewports on their own layer and set the layer to "no print" in the Layer Properties Manager.

 

Once you have your viewport set up the way you want it is a good idea to have the display locked. This can be done in a couple of different ways. One way is to do it via the Properties palette. The other way is to highlight the viewport frame then right click and change "Display locked" from "No" to "Yes". Doing this will prevent accidentally changing the viewport scale when moving between paper space and model space.

 

Question: How does one pan in a locked viewport? Answer: You can grip edit the viewport effectively panning without unlocking it. (Thanks RobDraw)

 

It is possible to freeze layers in individual viewports via the Layer Properties Manager and the VP Freeze column.

 

Cycle between viewports by pressing Ctrl+R repeatedly until you reach the viewport you want.

 

Viewports do not necessarily have to be rectangular; they can be odd shaped (polygonal) or even circular. Do this via the MVIEW command. Use either the Object or Polygonal option.

 

The number of active viewports in a paperspace layout is controlled by the system variable MAXACTVP (maximum active viewports). The default setting is 16. The maximum value is 64.

 

Viewports are ideally suited to displaying multiple views of 3D objects.

 

Viewports can have their own visual style independent of not only each other but of model space too.

 

Viewport controls were introduced in AutoCAD 2012 and appear in the upper left-hand corner of a viewport. This feature makes it easy to change the view or the visual style of an individual viewport. (Thanks Dadgad)

 

Viewport Controls can be enabled/disabled via the system variable VPCONTROL at the command line.

 

Viewport scale can be assigned/changed via the Viewports Toolbar, Properties palette, Quick Properties or by way of the scale list that appears in lower right-hand corner of one's screen on the Taskbar after clicking on the viewport frame. This link contains images of some of these options.

 

http://www.cadtutor.net/forum/showthread.php?72213-Viewports-and-Setting-Scale&highlight=viewports

 

* * * * * * * * * * * *

 

From AutoCAD Help:

 

VPROTATEASSOC

 

Controls whether the view within a viewport is rotated with the viewport when the viewport is rotated.

 

0 When a viewport is rotated, the view inside is not rotated.

1 When a viewport is rotated, the view inside is rotated to match the rotation of the viewport.

 

Note: After rotating a viewport, VPROTATEASSOC is set to 0 for a new viewport created in the same layout.

Edited by ReMark
Link to comment
Share on other sites

  • 5 months later...

I want two viewports with, for instance, Layer 1 ON in Viewport 1 and Layer 1 OFF in Viewport 2. BTW...it is snowing a blizzard here.

Link to comment
Share on other sites

And that's why there is a VPFreeze column in your Layer Properties Manager.

 

As long as it isn't snowing when I am in Montana in July I don't care. You guys can have all the snow for now. Less for us in Connecticut to shovel if most of it falls in Montana.

Link to comment
Share on other sites

Oh...It was way over on the left. Thanks Mark. And, of course(we hope) it is going to snow in Yellowstone in July, that will help keep the fires down. We have had awful fire seasons recently. And with all the beetle-kill, this year could be bad.

Link to comment
Share on other sites

  • 4 weeks later...
Have you mentioned about being able to set up viewport that doesn't have to be square?

Yes I did. Perhaps you missed the word "polygonal"?

Link to comment
Share on other sites

  • 2 weeks later...

Great on viewports.

 

It took me about 03 months to learn viewports and layouts and scaling and that staff on my on.

 

Had you done this earlier, could have cut the time by 2/3:D

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...