Sarah_H Posted October 24, 2012 Share Posted October 24, 2012 (edited) When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format. This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related] Any suggestions welcome! Edited October 24, 2012 by Sarah_H Quote Link to comment Share on other sites More sharing options...
MSasu Posted October 24, 2012 Share Posted October 24, 2012 Please make sure that drawing's units are also set to Decimal (see UNITS command). Quote Link to comment Share on other sites More sharing options...
Sarah_H Posted October 24, 2012 Author Share Posted October 24, 2012 That's the badger, solved the problem! Stupidly, it solved my colleague's earlier problem, I have no idea why I didn't think it would work with another, similar issue! Thanks very much for your reply Quote Link to comment Share on other sites More sharing options...
MSasu Posted October 24, 2012 Share Posted October 24, 2012 Glad to hear that your issue is now gone. You're entirely welcome! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.