FIFTHTEXAS Posted December 1, 2012 Share Posted December 1, 2012 Hi can anyone give advice, i usually do some site plans using google earth, copy and paste into a drawing. but have found on some images i need are not good. however i found better ones on bing maps using ariel view. is there a way i can copy and paste a bing map image into autocad? Quote Link to comment Share on other sites More sharing options...
Organic Posted December 1, 2012 Share Posted December 1, 2012 You should be able to copy and paste it the same as you were from Google Maps/Earth. Use the print screen (PRTSC) key on your keyboard to take a screenshot of the image, then paste that into paint or any other image editor and then insert it into AutoCad (or you can even pate it straight into AutoCad directly if you don't want to save a copy of the image). Quote Link to comment Share on other sites More sharing options...
pendean Posted December 1, 2012 Share Posted December 1, 2012 http://www.dotsoft.com sell a worthy tool that works a lot better than shaky low- quality copy-paste suggested above. Quote Link to comment Share on other sites More sharing options...
Murph_map Posted December 1, 2012 Share Posted December 1, 2012 Well if you had a current version of Map3D or Civil3D you could use Basejump. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.