ALUX Posted February 10, 2013 Share Posted February 10, 2013 I am trying to land an internship and this place that does a lot of detailed drawings for manufacturing. They dimension 3D parts using solview and soldraw, and then create detailed drawings for their machine shop. So what's the best textbook out there that would better help me understand all the different views and industry standard when dimensioning? Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 10, 2013 Share Posted February 10, 2013 What program do they use? Plain AutoCAD or one of the vertical products? Quote Link to comment Share on other sites More sharing options...
ALUX Posted February 10, 2013 Author Share Posted February 10, 2013 What program do they use? Plain AutoCAD or one of the vertical products? Sorry, it's AutoCAD 2012 and 2013. Quote Link to comment Share on other sites More sharing options...
ReMark Posted February 10, 2013 Share Posted February 10, 2013 You might suggest that they take a look at using the BaseView command. It creates 2D blocks of 3D models and places them in a layout. Recommended reading...http://www.goodreads.com/book/show/2413964.Technical_Drawing I believe this book has been recommended in the past by forum member J.D. Mather ( a Professor by the way ). Quote Link to comment Share on other sites More sharing options...
rkent Posted February 10, 2013 Share Posted February 10, 2013 You need to find out if they use ANSI Y14.5 Geometric Dimensioning and Tolerancing and make sure the book you purchase includes a good section covering that. As for orthographic projection you can get drafting books that are older for very cheap online, like .99 cents cheap. http://www.alibris.com/booksearch?qwork=6580018&qsort=p&matches=338&cm_sp=works*listing*buyused This one has a good section on GD&T along with most aspects of drafting, also can be had for .99 cents. http://www.alibris.com/booksearch.detail?invid=10293225041&qwork=2054373&qsort=&page=1 Quote Link to comment Share on other sites More sharing options...
ALUX Posted February 14, 2013 Author Share Posted February 14, 2013 Nice, thank you. Quote Link to comment Share on other sites More sharing options...
JD Mather Posted February 14, 2013 Share Posted February 14, 2013 You might suggest that they take a look at using the BaseView command.... Or better yet, the ViewBase command... ....which replaces the older solview, soldraw commands and is much more powerful and associative. Show them this functionality and they will be impressed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.