KharizzaJeh Posted March 5, 2013 Share Posted March 5, 2013 I have a problem drawing this two figures, it seems that it doesnt have the complete dimensions... can anyone help me draw this or teach me instead..? Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 Is this a class assignment? Are you drawing the isometric view only or do you have to draw all the standard views (top, front, and side)? Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 yes, we are assigned to draw it in 3d... Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 How far have you gotten? Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 i already drawn figure 7.67, but im not sure if i drew it right Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 Attach a copy of the DWG file to your next post and someone here will take a look at it. Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 figure 7.67, i havent drawn 7.68 Drawing3.dwg Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 At first glance your drawing looks pretty good but there are a couple of things I need to check. Of the four holes that penetrate the base two are supposed to have a 9mm diameter and the other two a 8mm diameter. You have one hole at 9mm and the other three at 8mm. Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 thank you very much, please do check the errors, thank you Sir Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 Figure 7.68 is a bit unusual. I'll have to study it further. Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 thanks again, I'm really having a hardtime in that figure Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 I really need your help in that figure, Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 I'm still trying to figure it out myself. Quote Link to comment Share on other sites More sharing options...
dbroada Posted March 5, 2013 Share Posted March 5, 2013 I think there is enough information there but you will need to use the TANGENT snap. (I only do 2D so I may have missed something in the other view). Quote Link to comment Share on other sites More sharing options...
ReMark Posted March 5, 2013 Share Posted March 5, 2013 Best I can do at the moment. Got to go now. Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 i also tried doing the 2d, but i cant figure out where will i Find the dimensions of the upper left side of the figure Quote Link to comment Share on other sites More sharing options...
dbroada Posted March 5, 2013 Share Posted March 5, 2013 ReMark and I have interrpreted it slightly differently (I think he is more correct than me) in where we have positioed the large curve. As for the left side, you can position both holes wrt each other which gives you the outside shape. Start by putting the holes down. Quote Link to comment Share on other sites More sharing options...
KharizzaJeh Posted March 5, 2013 Author Share Posted March 5, 2013 that looks great I still cant figure out where will i put the center R67 Quote Link to comment Share on other sites More sharing options...
dbroada Posted March 5, 2013 Share Posted March 5, 2013 that is where ReMark and I differ. I now think it is in line with the RH edge. Quote Link to comment Share on other sites More sharing options...
JD Mather Posted March 5, 2013 Share Posted March 5, 2013 Tangent to R14 and passing through 36. If you use Constraints (parametric tab) this will be solved for you. I don't think there is a planar face between the two. (therefore no line) Back in a bit to check it closer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.