+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Forum Newbie
    Using
    AutoCAD 2010
    Join Date
    Oct 2012
    Posts
    2

    Default Help Please: Pennfoster/ICS Civil Drafting Plates 3 and 4

    Registered forum members do not see this ad.

    Hi there,

    I have completed everything in my Pennfoster [Or ICS Canada] Drafting with AutoCAD course except for the Civil Drafting and Structural Drafting projects. I have plates 1 and 2 done for Civil, but I honestly have no idea how to go about 3 or 4. I have searched and read many of the other threads on this site, but I'm afraid I just don't understand how to do the profiles.

    With Structural I haven't spent as much time on it (quite frankly I can't even remember why it was stumping me all I know is I flew through Electrical, HVAC and my Elective in comparison to these two projects).

    Any and all help would be much appreciated. I'm attempting to finish this course before my Wedding in May as my fiancé and I could use the help that this degree could bring me in finding a better paying job.

    The worse part is my average is high enough to hand in the last two projects incomplete and even if they scored a zero I would pass with an 81 (Not that I want to do that mind you, I'm just incredible frustrated like many other Pennfoster students have been on here I gathered.)

    But anyways, yes basically I am looking for someone to give me some sort of step by step method to do the last two plates for Civil so I can get it done and out of my way.

  2. #2
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,375

    Default

    Have you looked at the similar threads regarding that project? I think one of the students posted a response from an instructor on how to go about creating the profiles. Got to give them what they want right?

    OK, I just looked for you and this is the thread you need to read. See posts 32 through 39. One of the posts is a quote taken from an email by a P-F instructor.

    http://www.cadtutor.net/forum/showth...-3-and-4/page4

    Everything you need to know is right there. Good luck on finishing your project.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

  3. #3
    Forum Newbie
    Using
    AutoCAD 2010
    Join Date
    Oct 2012
    Posts
    2

    Default

    Okay thanks, hopefully I can figure it out from this! The quick response was appreciated, I had originally skimmed that page over not realizing the value of it.

  4. #4
    Quantum Mechanic ReMark's Avatar
    Computer Details
    ReMark's Computer Details
    Operating System:
    Windows 7 Pro 64-bit
    Computer:
    Thinkmate
    Motherboard:
    Intel DX58SO2 LGA1366 X58
    CPU:
    Intel i7-960 Quad-core 3.20GHz 8MB cache
    RAM:
    12GB (3x4GB) PC3-106000 DDR3
    Graphics:
    nVidia Quadro K4200, 4GB GDDR5
    Primary Storage:
    150GB Velocipraptor 10,000 rpm
    Secondary Storage:
    none
    Monitor:
    Dell P24LLH - 24" wide screen LCD
    Discipline
    See details...
    ReMark's Discipline Details
    Occupation
    CAD Draftsman/Designer...chemical manufacturing.
    Discipline
    See details below.
    Details
    I work for a specialty chemical manufacturer. I do a little bit of everything from P&IDs to civil to architectural and structural.
    Using
    AutoCAD 2018
    Join Date
    Nov 2005
    Location
    Norwalk, CT USofA
    Posts
    46,375

    Default

    Registered forum members do not see this ad.

    Should you have any further questions please return and post them. I'll check this thread from time to time.
    "I have only come here seeking knowledge. Things they wouldn't teach me of in college." The Police

    Eat brains...gain more knowledge!

    I'm now a full member of the Society for the Promotion of Mediocrity in CAD. Standards? We don't need no stinkin' standards! Take whatever advice I offer and do the opposite.

Similar Threads

  1. Structural Drafting With Autocad, help with the last 3 plates
    By paisis123 in forum Student Project Questions
    Replies: 194
    Last Post: 17th Jun 2016, 08:44 pm
  2. Pennfoster's Elecrical and electronic schematic drafting project
    By HARPAL in forum Student Project Questions
    Replies: 52
    Last Post: 28th Jan 2015, 08:59 pm
  3. Pennfoster's drafting with Autocad Elective Project (civil Drafting)
    By HARPAL in forum Student Project Questions
    Replies: 23
    Last Post: 8th Jan 2013, 07:21 pm
  4. Civil Drafting
    By bracken2 in forum Student Project Questions
    Replies: 8
    Last Post: 1st Jan 2012, 10:17 pm

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts