Madruga_SP Posted April 10, 2013 Share Posted April 10, 2013 Hi guys, I'm trying to use gravel hatch in my drawing, but not working. In other of drawings works perfect. Maybe the problem can be in this drawing. Anybody Can help me please?? Thank in advance Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 10, 2013 Share Posted April 10, 2013 Are you going to attach a copy of the DWG file? Quote Link to comment Share on other sites More sharing options...
Madruga_SP Posted April 10, 2013 Author Share Posted April 10, 2013 Sorry ReMark, regards Quote Link to comment Share on other sites More sharing options...
Madruga_SP Posted April 10, 2013 Author Share Posted April 10, 2013 Problem solved guys, This is a problem that occurs if the 'hatch origin' is too far from 0,0,0 in the drawing. Best Regards Quote Link to comment Share on other sites More sharing options...
neophoible Posted April 10, 2013 Share Posted April 10, 2013 Yes, it doesn't look right. But I think ReMark meant to attach the DWG, not an image. Quote Link to comment Share on other sites More sharing options...
neophoible Posted April 10, 2013 Share Posted April 10, 2013 This is a problem that occurs if the 'hatch origin' is too far from 0,0,0 in the drawing. Really? I couldn't duplicate the problem, but then I didn't go past 1e12. Just how many light years from the origin was your hatch? Quote Link to comment Share on other sites More sharing options...
eldon Posted April 10, 2013 Share Posted April 10, 2013 Looking at the coordinates in the image, I managed to achieve this Quote Link to comment Share on other sites More sharing options...
neophoible Posted April 10, 2013 Share Posted April 10, 2013 (edited) I notice you didn't post the DWG either, but, OK, I'll bite. What's causing the two different results in the same DWG in your image? Presumably, they have different origins and were generated originally with such. I have to admit I did not try to set up a drawing with the extents shown. All I did was edit the origin of a hatch and regen, which did not yield any difference in my case. Edited April 10, 2013 by neophoible additional comments Quote Link to comment Share on other sites More sharing options...
BIGAL Posted April 11, 2013 Share Posted April 11, 2013 HATCH ORIGIN !!!!!! 0,0 v's 269025.732,5771691.123 GDA94 MGA Zone 55 Quote Link to comment Share on other sites More sharing options...
ReMark Posted April 11, 2013 Share Posted April 11, 2013 The lesson for today is don't hatch your drawing of Mars if your origin is back on Earth. Quote Link to comment Share on other sites More sharing options...
Madruga_SP Posted April 11, 2013 Author Share Posted April 11, 2013 (edited) Thanks guys, I don't know what caused the problem. The drawing origin was correct, but the Hatch origin wasn't and I don't know why. When I edited the new origin of hatch, the problem was solved. Thank for the help, guys. I've learnt a very helpful thing with you. Edited April 11, 2013 by Madruga_SP Quote Link to comment Share on other sites More sharing options...
PotGuy Posted April 18, 2013 Share Posted April 18, 2013 The lesson for today is don't hatch your drawing of Mars if your origin is back on Earth. Really? I thought all hatches travelled there! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.