Help distance and azimuth lisp

Don't worry about it. We're just teasing you is all.

Whatever. I want my money's worth for "_non".

Whatever. I want my money's worth for "_non".

He's baaacck...

My unit settings are decimal , grads ,clock wise ,and direction noth and i use annotation texts.

I update the code but i have the same problems

1) I change the rad to grad but the angle is in dregrees (i dont know why)

2) the direction is clockwise

3)I try to change the direction to north but i am not sure if is correct . I want to calculate the angle a

4)I add a layer

5)I add annotate text style (but is not working with the text , something is missing). I want the paper text height to be 2.5 not the text height in model space

Can any one help ?

thanks

;;; ROTINA PARA COTAR E OU AZIMUTAR POLYLINES - TEXTO NO DESENHO = 2.34 ou 2.34 - Az 23°15΄7" 
;;; AS MEDIDAS APARECEM COMO FORAM DIGITADAS NO DESENHO (METROS, MILΝMETROS, ETC) 
;;; A ALTURA DO TEXTO Ι SOLICITADA NA EXECUΗΓO DA ROTINA E O STYLE Ι O CORRENTE 
;;; ACERTAR ALTURA DO TEXTO DE ACORDO COM A ESCALA DE PLOTAGEM. PARA DEIXAR EM DEFAULT USE O COMMAND: TEXTSIZE 
;;; Forum www.autolisp.com.br - Nome da rotina original: AZPOL - Autor: Orlei 29/08/2006 
;;; Adaptaηγo: Rogιrio Zanini e Mαrcio 
;;;---------------------------------------------------------- ------------------------ 

(defun C:AZI () 
(command "undo" "begin")
;---------------Sub-functions - Start------------- 
(defun Radtograds () 
(/ (* (angle A B) 200) Pi) 
) 
;------------------------------------------------- 
(defun Gradstorad (AZIMUTE) 
(* (/ AZIMUTE 200) Pi) 
) 
;------------------------------------------------- 
(defun PARALELO () 
(setq A1 (polar A (+ (/ pi 2)(angle B A )) (+ (* 0.15 htext))))  
(setq B1 (polar B (+ (/ pi 2)(angle B A )) (+ (* 0.15 htext))))
(setq ptx (/ (+ (car B1) (car A1)) 2)) 
(setq pty (/ (+ (cadr B1) (cadr A1)) 2)) 
(setq ponto_meio (list ptx pty)) 
(if (< (car A1)(car B1)) 
(setq inicio B1) 
(setq inicio A1) 
) 
) 
;------------------------------------------------- 
(defun MUDAR () 
(setq XL 2) 
(setq J "d") 
(setq COM1 (substr D 1 1)) 
(while (< XL 5) 
(setq LETRAT (substr D XL 1)) 
(setq RESTOT (substr D (+ 1 XL) )) 
(if (= LETRAT J) 
(progn (setq J "%%d") 
(setq XL 6) 
(setq PALAV (strcat COM1 J RESTOT)) 
) 
) 
(setq COM1 (strcat COM1 LETRAT )) 
(setq XL (1+ XL)) 
) 
) 
;----------------Sub-functions - End ------------- 
(setq tsize (getvar "textsize")) 
(setq htext 2.5) 
(COMMAND "_layer" "_m" "_AZIMUTH" "_c" "150" "" "")
(command "_.-style" "_TopoCad" "arial.ttf" "_annotative" "_yes" "_no" 2.5 1.0 0.0 "_no" "_no" "_no")
(setvar"cmdecho" 0) 
(command "osmode" 0) 
(command "angbase" 300) 
(command "angdir" 1) 
(setq flagv "falso") 
(setq controle 0) 
(setq controle1 0) 
(setq contador 0) 
(while (= flagv "falso") 
(setq mostre (entsel "\nSelecione a Polyline <2d> : ")) 
(setq linha (entget (car mostre ))) 
(setq verificador (cdr(assoc 0 linha))) 
(if (= verificador "LWPOLYLINE") 
(progn 
(setq verif (cdr (assoc 70 linha))) 
(setq flagv "verdade") 
) 
(Princ "\ nIt is not Polyline !!") 
) 
) 
(setq controle1 (length linha)) 
(setq amostra '()) 
(repeat controle1 
(setq x (caar linha)) 
(if (= x 10) 
(progn 
(setq item (car linha)) 
(setq amostra (cons item amostra)) 
(setq contador (1+ contador)) 
) 
) 
(setq linha (cdr linha)) 
) 
(setq amostra1 (reverse amostra)) 
(if (= verif 1) 
(setq amostra (cons (car amostra1) amostra)) 
(setq contador (1- contador)) 
) 
(setq controle contador) 
(repeat controle 
(setq PTO1 (cdr(car amostra))) 
(setq PTO2 (cdr(car(cdr amostra)))) 
(AZIMUTAR) 
(setq amostra(cdr amostra)) 
) 
(command "undo" "end") 
(princ) 
) 
(defun AZIMUTAR () 
(setq padroes (getvar "osmode")) 
(setvar"cmdecho" 0) 
(command "osmode" 0) 
(setq A PTO1) 
(setq B PTO2) 
(setq C " - Az ")
(setq D (angtos (angle A B) 1 4))
(MUDAR) 
;------------- MODIFICAΗΓO ROGΙRIO OPΗΓO AZIMUTE ---------------- 
(setq E (Strcat(rtos (distance A B) 2 2)"m"))   
(setq DADO (strcat E C PALAV)) 
;---------------------------------------------------------- ------ 
(PARALELO) 
(entmake 
(list 
(cons 0 "TEXT") 
(cons 7 (getvar "textstyle")) ;STYLE DE TEXTO CORRENTE DO DESENHO 
(cons 100 "AcDbText") 
(cons 10 ponto_meio) 
(cons 11 ponto_meio) 
(cons 40 htext) ;ALTURA DO TEXTO CORRENTE NO DESENHO 
(cons 1 dado) 
(cons 50 (angle ponto_meio inicio)) ;TEXTO PARALELO A LINHA 
(cons 72 1)
(cons 73 1) 
) 
) 
(setvar "textsize" tsize) 
(command "osmode" padroes) 
(command "osmode" "37") ; ACRESCENTADO MΑRCIO - OSNAP END/INT/CEN 
(princ) 
)

He's baaacck...

lol. I never saw this...3+ years ago.

Nice joke. Can any one help or not !!!!

lol. I never saw this...3+ years ago.

My old post! 3 years ago

The problem is solved . Thanks for nothing.