ALUX Posted April 22, 2013 Share Posted April 22, 2013 [ATTACH=CONFIG]41547[/ATTACH] So I have this drawing that I am trying to convert into 3D with the given dimensions. It seems like an easy part to make but I am not sure which drawing is correct. I have drawing-1 and drawing-2. Can someone open both up and tell me which way one is correct? I would really appreciate the help. [ATTACH]41545[/ATTACH] [ATTACH]41546[/ATTACH] Quote Link to comment Share on other sites More sharing options...
ALUX Posted April 22, 2013 Author Share Posted April 22, 2013 Here's the drawing (dwg) for better clarity. [ATTACH]41548[/ATTACH] Quote Link to comment Share on other sites More sharing options...
JD Mather Posted April 22, 2013 Share Posted April 22, 2013 Here is the file (you didn't indicate the corner style you need. Sheet Metal.dwg Quote Link to comment Share on other sites More sharing options...
ALUX Posted April 22, 2013 Author Share Posted April 22, 2013 Sorry about that. They should be 1/8. Quote Link to comment Share on other sites More sharing options...
ALUX Posted April 22, 2013 Author Share Posted April 22, 2013 So my drawing-1 wasn't correct? Quote Link to comment Share on other sites More sharing options...
JD Mather Posted April 22, 2013 Share Posted April 22, 2013 When I refer to corner types this is what I mean. Quote Link to comment Share on other sites More sharing options...
ALUX Posted April 22, 2013 Author Share Posted April 22, 2013 I see what you mean. The drawing doesn't call it out anywhere. Here's the drawing name if that helps. OUTER PANEL - FRONT HEATER PLENUM, VERTICAL END DRYER WELDMENT Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.