Groutie Posted September 1, 2006 Share Posted September 1, 2006 I mean, sheeeeeit LSR uda man. Ya can't get a better tutorial that that. Nuff said, nice football................... Quote Link to comment Share on other sites More sharing options...
lasershows Posted September 1, 2006 Share Posted September 1, 2006 jesus, the code does nothing, its poorly explained maybe unless your an expert in lisp and autocad and so far I didnt see anyone else manage to make another ball from it. Quote Link to comment Share on other sites More sharing options...
tzframpton Posted September 1, 2006 Share Posted September 1, 2006 jesus, the code does nothing, its poorly explained maybe unless your an expert in lisp and autocad and so far I didnt see anyone else manage to make another ball from it. so just because someone posts a tutorial means everyone should try it out? lol Quote Link to comment Share on other sites More sharing options...
Gothic Posted September 2, 2006 Share Posted September 2, 2006 I can't run the Lisp file u supposed. I don't know what it happened. when i load this lisp file into my obj, it sign me unknown command. Gothic Quote Link to comment Share on other sites More sharing options...
CarlB Posted September 2, 2006 Share Posted September 2, 2006 Since there seems to be interest in this soccer ball lisp, so I simplified the routine to include the coordinates in the routine. It draws points, not surfaces. (defun c:soccer () (setq ptlist '( (0.00000000 1.00000000 4.85410197) (0.00000000 -1.00000000 -4.85410197) (0.00000000 1.00000000 -4.85410197) (0.00000000 -1.00000000 4.85410197) (1.00000000 4.85410197 0.00000000) (1.00000000 -4.85410197 0.00000000) (-1.00000000 4.85410197 0.00000000) (-1.00000000 -4.85410197 0.00000000) (4.85410197 0.00000000 1.00000000) (4.85410197 0.00000000 -1.00000000) (-4.85410197 0.00000000 1.00000000) (-4.85410197 0.00000000 -1.00000000) (2.00000000 4.23606798 1.61803399) (-2.00000000 4.23606798 1.61803399) (2.00000000 4.23606798 -1.61803399) (-2.00000000 4.23606798 -1.61803399) (2.00000000 -4.23606798 1.61803399) (-2.00000000 -4.23606798 1.61803399) (2.00000000 -4.23606798 -1.61803399) (-2.00000000 -4.23606798 -1.61803399) (4.23606798 1.61803399 2.00000000) (-4.23606798 1.61803399 2.00000000) (4.23606798 1.61803399 -2.00000000) (-4.23606798 1.61803399 -2.00000000) (4.23606798 -1.61803399 2.00000000) (-4.23606798 -1.61803399 2.00000000) (4.23606798 -1.61803399 -2.00000000) (-4.23606798 -1.61803399 -2.00000000) (1.61803399 2.00000000 4.23606798) (-1.61803399 2.00000000 4.23606798) (1.61803399 2.00000000 -4.23606798) (-1.61803399 2.00000000 -4.23606798) (1.61803399 -2.00000000 4.23606798) (-1.61803399 -2.00000000 4.23606798) (1.61803399 -2.00000000 -4.23606798) (-1.61803399 -2.00000000 -4.23606798) (1.00000000 3.61803399 3.23606798) (-1.00000000 3.61803399 3.23606798) (1.00000000 3.61803399 -3.23606798) (-1.00000000 3.61803399 -3.23606798) (1.00000000 -3.61803399 3.23606798) (-1.00000000 -3.61803399 3.23606798) (1.00000000 -3.61803399 -3.23606798) (-1.00000000 -3.61803399 -3.23606798) (3.61803399 3.23606798 1.00000000) (-3.61803399 3.23606798 1.00000000) (3.61803399 3.23606798 -1.00000000) (-3.61803399 3.23606798 -1.00000000) (3.61803399 -3.23606798 1.00000000) (-3.61803399 -3.23606798 1.00000000) (3.61803399 -3.23606798 -1.00000000) (-3.61803399 -3.23606798 -1.00000000) (3.23606798 1.00000000 3.61803399) (-3.23606798 1.00000000 3.61803399) (3.23606798 1.00000000 -3.61803399) (-3.23606798 1.00000000 -3.61803399) (3.23606798 -1.00000000 3.61803399) (-3.23606798 -1.00000000 3.61803399) (3.23606798 -1.00000000 -3.61803399) (-3.23606798 -1.00000000 -3.61803399) ) ) (foreach x ptlist (command "._point" x) ) (princ) ) Quote Link to comment Share on other sites More sharing options...
LSR Posted September 4, 2006 Author Share Posted September 4, 2006 Gothic and Lasershows: If you guys had followed or read the thread sequence you would notice that I posted the wrong code (typo error) the first time, the two previous guys made the same mistake as you guys. I corrected the code since then, the correct one is somewhere in the middle of the thread. "X" made a glass like ball. CarlB: Simpler code. An excellent one, I like it. Yes, it only draws points not surfaces. These points represent the vertices of the icosahedron which you create the surfaces. Quote Link to comment Share on other sites More sharing options...
Gothic Posted September 11, 2006 Share Posted September 11, 2006 Gothic and Lasershows:If you guys had followed or read the thread sequence you would notice that I posted the wrong code (typo error) the first time, the two previous guys made the same mistake as you guys. I corrected the code since then, the correct one is somewhere in the middle of the thread. "X" made a glass like ball. CarlB: Simpler code. An excellent one, I like it. Yes, it only draws points not surfaces. These points represent the vertices of the icosahedron which you create the surfaces. thanks 4 ur rply. i'll try it again as u proposed. i'm just a novice in those field. thank you. Gothic Quote Link to comment Share on other sites More sharing options...
Gothic Posted October 16, 2006 Share Posted October 16, 2006 I've caught it, N' I love it very much that......... Thank you Gothic Quote Link to comment Share on other sites More sharing options...
Guest Antisthenes Posted February 2, 2007 Share Posted February 2, 2007 how can i get a DWG of your soccerball to make a SAT out of? thanks Quote Link to comment Share on other sites More sharing options...
chan09 Posted April 5, 2007 Share Posted April 5, 2007 Now, i also got one....! Quote Link to comment Share on other sites More sharing options...
Norts Posted April 5, 2007 Share Posted April 5, 2007 whilst this is a very good tutorial, it should be made clear that is not soccer, it is indeed football Quote Link to comment Share on other sites More sharing options...
kthuyein Posted March 1, 2008 Share Posted March 1, 2008 Since there seems to be interest in this soccer ball lisp, so I simplified the routine to include the coordinates in the routine. It draws points, not surfaces. (defun c:soccer () (setq ptlist '( (0.00000000 1.00000000 4.85410197) (0.00000000 -1.00000000 -4.85410197) (0.00000000 1.00000000 -4.85410197) (0.00000000 -1.00000000 4.85410197) (1.00000000 4.85410197 0.00000000) (1.00000000 -4.85410197 0.00000000) (-1.00000000 4.85410197 0.00000000) (-1.00000000 -4.85410197 0.00000000) (4.85410197 0.00000000 1.00000000) (4.85410197 0.00000000 -1.00000000) (-4.85410197 0.00000000 1.00000000) (-4.85410197 0.00000000 -1.00000000) (2.00000000 4.23606798 1.61803399) (-2.00000000 4.23606798 1.61803399) (2.00000000 4.23606798 -1.61803399) (-2.00000000 4.23606798 -1.61803399) (2.00000000 -4.23606798 1.61803399) (-2.00000000 -4.23606798 1.61803399) (2.00000000 -4.23606798 -1.61803399) (-2.00000000 -4.23606798 -1.61803399) (4.23606798 1.61803399 2.00000000) (-4.23606798 1.61803399 2.00000000) (4.23606798 1.61803399 -2.00000000) (-4.23606798 1.61803399 -2.00000000) (4.23606798 -1.61803399 2.00000000) (-4.23606798 -1.61803399 2.00000000) (4.23606798 -1.61803399 -2.00000000) (-4.23606798 -1.61803399 -2.00000000) (1.61803399 2.00000000 4.23606798) (-1.61803399 2.00000000 4.23606798) (1.61803399 2.00000000 -4.23606798) (-1.61803399 2.00000000 -4.23606798) (1.61803399 -2.00000000 4.23606798) (-1.61803399 -2.00000000 4.23606798) (1.61803399 -2.00000000 -4.23606798) (-1.61803399 -2.00000000 -4.23606798) (1.00000000 3.61803399 3.23606798) (-1.00000000 3.61803399 3.23606798) (1.00000000 3.61803399 -3.23606798) (-1.00000000 3.61803399 -3.23606798) (1.00000000 -3.61803399 3.23606798) (-1.00000000 -3.61803399 3.23606798) (1.00000000 -3.61803399 -3.23606798) (-1.00000000 -3.61803399 -3.23606798) (3.61803399 3.23606798 1.00000000) (-3.61803399 3.23606798 1.00000000) (3.61803399 3.23606798 -1.00000000) (-3.61803399 3.23606798 -1.00000000) (3.61803399 -3.23606798 1.00000000) (-3.61803399 -3.23606798 1.00000000) (3.61803399 -3.23606798 -1.00000000) (-3.61803399 -3.23606798 -1.00000000) (3.23606798 1.00000000 3.61803399) (-3.23606798 1.00000000 3.61803399) (3.23606798 1.00000000 -3.61803399) (-3.23606798 1.00000000 -3.61803399) (3.23606798 -1.00000000 3.61803399) (-3.23606798 -1.00000000 3.61803399) (3.23606798 -1.00000000 -3.61803399) (-3.23606798 -1.00000000 -3.61803399) ) ) (foreach x ptlist (command "._point" x) ) (princ) ) I got only points. Why? Help me Quote Link to comment Share on other sites More sharing options...
chan09 Posted March 1, 2008 Share Posted March 1, 2008 I got only points. Why? Help me you should read this topic fist page , the post of topic owner.. this is not for surface, soccer is only solid. lisp file is only for coordinate points. u should follow topic owner way. thankz n regards Quote Link to comment Share on other sites More sharing options...
ascorbic Posted March 5, 2008 Share Posted March 5, 2008 so the one posted by CarlB is the soccer ball lisp? so how do i use this lisp? i have 0 knowledge in lisp, all i know that lisp is a programming language use by autocad. could you teach me how to use lisp posted by CarlB? i'm interested to model this this because i could practice again in cad 3d modeling. thanks! Quote Link to comment Share on other sites More sharing options...
Ritch7 Posted March 5, 2008 Share Posted March 5, 2008 for a football (or soccerball for the americans) it all depends on how you wish to draw it, some people use different techniques, lisps or no lisps, theire only there to make things quicker and easier. ROUGH IT OUT FROM SCATCH! Quote Link to comment Share on other sites More sharing options...
chan09 Posted April 7, 2008 Share Posted April 7, 2008 so the one posted by CarlB is the soccer ball lisp? so how do i use this lisp? i have 0 knowledge in lisp, all i know that lisp is a programming language use by autocad. could you teach me how to use lisp posted by CarlB? i'm interested to model this this because i could practice again in cad 3d modeling. thanks! plz go to the below link! "http://www.esnips.com/doc/0c30f9f7-7b54-43b7-a2f0-285ce394b133/3d-soccer" enjoy! Quote Link to comment Share on other sites More sharing options...
ascorbic Posted April 29, 2008 Share Posted April 29, 2008 @chan09 thanks for the link! btw, how can i download the .swf file? Quote Link to comment Share on other sites More sharing options...
GE13579 Posted April 29, 2008 Share Posted April 29, 2008 ...so how do i use this lisp? i have 0 knowledge in lisp, all i know that lisp is a programming language use by autocad. could you teach me how to use lisp posted by CarlB?.. You can learn more on how to use Lisps here. Quote Link to comment Share on other sites More sharing options...
chan09 Posted April 29, 2008 Share Posted April 29, 2008 @chan09 thanks for the link! btw, how can i download the .swf file? u just click the download thankz for ur downloading my flash file.. some more i want u to invite from my blog but sorry for font, i will translate to english version not so soon.. but my account still can't link for url coz of my posts not more than 9 posts urs, chan chan Quote Link to comment Share on other sites More sharing options...
chan09 Posted April 29, 2008 Share Posted April 29, 2008 u just click the download thankz for ur downloading my flash file.. some more i want u to invite from my blog but sorry for font, i will translate to english version not so soon.. but my account still can't link for url coz of my posts not more than 9 posts urs, chan chan u just click the download thankz for ur downloading my flash file.. some more i want u to invite from my blog but sorry for font, i will translate to english version not so soon.. urs, chan chan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.