list box slide

Hi , i want to make a list box slide (with lisp) like the attach photo. Can any show me an example how to do it ?

Please check this previous discussion.

hi ,MSasu .I have seen this post but is not like the example i want

Is not identical, but is similar, so you may use it as a starter.

It is compicated.I need a small example to understand it

To get what you are looking for, it will be complicated, best to study the example.....(not a simple application)

If you want super simple then use a mnu with its inbuilt slide function. You cannot change its look but it does support multiple pages. You just have Menu item group that you pick. Also why not Tool palettes.

Hi Bigal i have a question

***image
**TRENCH
[TRENCH]
[sLD(CGG101,KERB)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG101") 
[sLD(CGG102,NATURE)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG102") 
**PIPES
[PIPES]
[sLD(SD201,SUBSOIL)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG201") 
[sLD(SD202,FLUSHOUT)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG202") 
[sLD(SD203,CATCH)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG203") 
[sLD(SD204,HOUSE)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG204") 
[sLD(SD205,STREET)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG205") 
[sLD(SD206,EASEMENT)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG206") 
[sLD(SD207,ANCHOR)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG207")

all my slides is in a file c:\Symbol library\sld

How can i write it ??

Go to (F1) Hep file -> Command Reference -> Utilities -> SLIDELIB

Hi Fixo how to use this ? I canot understand

slidelib library [ < slidelist ] 
dir *.sld /b > mylist
slidelib mlib < mylist

I try something like this but is not working

***image
**TRENCH
[TRENCH]
[c:\Symbol library\sld (CGG101,KERB)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG101") 

or
[sLD(c:\Symbol library\sld \CGG101.sld,KERB)]^C^C(openblk "P:/ACADSTDS/CIVIL STANDARDS/CGG101")  

can you show me an example?

A lot of examples in the thread that was linked by Msasu

This sort of thing, using your own custom paths, images, directories, and actions to be preformed, cannot be simply written for you.

You will need to take an honest stab (attempt) to code it yourself, and WHEN you run into a singular issue (error, statement not working, unable to construct statement, etc), then come here and post about it for the quickest results.

Not orders but this is how I usually get by so I'm referring you to the same method

The slide library file the slb just needs to live in a location you have defined in your support paths CONFIG FILES "Working Support File Search Path" Add

You dont need the path then. I think the space is screwing it up in "Symbol Library"

not sure if I posted top menu code

***MENUGROUP=STDS
***POP15
**CADLIB
            [LIBRARY]
            [->Stddwgs]
            [TRENCH]$I=STDS.TRENCH $I=*
            [PIPES]$I=STDS.PIPES $I=*

BIGAL I can not understand you sorry .I ask for a specific directory

c:\Symbol library\sld

Can any one give an example with this ???

Ok here we are .

I have this list box menu

The sld must be the path of slide icons

The full path is c:\topocad\sld

Don't forget .I have gone to

tools -> options and give the path c:\topocad

***image
**Symbols
[symbol library]
[sLD(arrow,Arrow)]^C^C^P(load"symbols");_arrow  
[sLD(north,North)]]^C^C^P(load"symbols");_north

The slide icons is in the sld folder but when i load the menu i can't see the icons

if i write this and coppy my slide icons in topocad file only

***image
**Symbols
[symbol library]
[(arrow,Arrow)]^C^C^P(load"symbols");_arrow  
[(north,North)]]^C^C^P(load"symbols");_north

this menu works and see the icons.

The problem is that i want to put my slide icons in the file sld. How can i do it ?

As Fixo previously posted

Ok bottom left click Start

then CMD

then c:

CD\

Cd topocad\sld

dir *.sld /b > mylist

slidelib SLD

a new file SLD.SLB should now exist

should now work, if slidelib does not work look for it in c:\program files\autodesk\Autocad 2013 etc and copy to topocad\SLD

Hi Bigal .I do all the steps C:\topocad\sld .After that can't find any *.slb file in sld folder??

In the cmd after C:\topocad\sld i add dir *.sld /b > mylist. And Create a file with name mylist with no extension in sld folder. Then i add slidelib SLD

thank you BIGAL i find it

I take it could not find SLIDELIB I usually copy it to a shorter directory like my c:\acadtemp so I can find it easy C:\acadtemp\slidelib SLD

Use a script to make sld's can do 100+ dwgs in a few minutes.

Open dwg1 Z E Z 0.9 mslide dwg1 close N

Open dwg2 Z E Z 0.9 mslide dwg1 close N